Previous Session Note:

None

llmail <command>
  users: Get list of users on the system
  send "<users>" "subject" "message": Send a message. 600 token max.

Username | Title
steve    | Security Engineer

steve@naisys:/var/naisys/home/steve [Tokens: 660/6000]$ 

steve@naisys:/var/naisys/home/steve [Tokens: 687/6000]$ 

steve@naisys:/var/naisys/home/steve [Tokens: 716/6000]$ 

steve@naisys:/var/naisys/home/steve [Tokens: 743/6000]$ 

total 8
drwxr-xr-x 2 root root 4096 Mar  7 05:38 .
drwxr-xr-x 3 root root 4096 Mar  7 05:38 ..

steve@naisys:/var/naisys/home/steve [Tokens: 816/6000]$ 

steve@naisys:/ [Tokens: 846/6000]$ 

steve@naisys:/ [Tokens: 863/6000]$ 

total 72
drwxr-xr-x  19 root root  4096 Feb 26 05:08 .
drwxr-xr-x  19 root root  4096 Feb 26 05:08 ..
lrwxrwxrwx   1 root root     7 Mar 17  2023 bin -> usr/bin
drwxr-xr-x   4 root root  4096 Feb 26 03:27 boot
drwxr-xr-x  17 root root  3820 Feb 26 03:47 dev
drwxr-xr-x 109 root root  4096 Mar  6 06:08 etc
drwxr-xr-x   2 root root  4096 Apr 18  2022 home
lrwxrwxrwx   1 root root     7 Mar 17  2023 lib -> usr/lib
lrwxrwxrwx   1 root root     9 Mar 17  2023 lib32 -> usr/lib32
lrwxrwxrwx   1 root root     9 Mar 17  2023 lib64 -> usr/lib64
lrwxrwxrwx   1 root root    10 Mar 17  2023 libx32 -> usr/libx32
drwx------   2 root root 16384 Mar 17  2023 lost+found
drwxr-xr-x   2 root root  4096 Mar 17  2023 media
drwxr-xr-x   2 root root  4096 Mar 17  2023 mnt
drwxr-xr-x   3 root root  4096 Feb 26 03:14 opt
dr-xr-xr-x 166 root root     0 Feb 26 03:47 proc
drwx------  14 root root  4096 Mar  7 05:37 root
drwxr-xr-x  30 root root   900 Mar  7 05:28 run
lrwxrwxrwx   1 root root     8 Mar 17  2023 sbin -> usr/sbin
drwxr-xr-x   6 root root  4096 Mar 17  2023 snap
drwxr-xr-x   2 root root  4096 Mar 17  2023 srv
dr-xr-xr-x  13 root root     0 Feb 26 03:47 sys
drwxrwxrwt  14 root root  4096 Mar  7 05:09 tmp
drwxr-xr-x  14 root root  4096 Mar 17  2023 usr
drwxr-xr-x  15 root root  4096 Mar  7 05:38 var

steve@naisys:/ [Tokens: 1475/6000]$ 

total 960
drwxr-xr-x 109 root     root       4096 Mar  6 06:08 .
drwxr-xr-x  19 root     root       4096 Feb 26 05:08 ..
-rw-------   1 root     root          0 Mar 17  2023 .pwd.lock
drwxr-xr-x   3 root     root       4096 Mar 17  2023 NetworkManager
drwxr-xr-x   2 root     root       4096 Mar 17  2023 PackageKit
drwxr-xr-x   8 root     root       4096 Feb 26 03:44 X11
-rw-r--r--   1 root     root       3028 Mar 17  2023 adduser.conf
-rw-r--r--   1 root     root         51 Sep  7 22:32 aliases
-rw-r--r--   1 root     root      12288 Sep  7 22:32 aliases.db
drwxr-xr-x   2 root     root       4096 Feb 26 05:01 alternatives
drwxr-xr-x   8 www-data www-data   4096 Mar  1 20:33 apache2
drwxr-xr-x   3 root     root       4096 Mar 17  2023 apparmor
drwxr-xr-x   8 root     root       4096 Feb 26 03:22 apparmor.d
drwxr-xr-x   3 root     root       4096 Sep  7 22:30 apport
drwxr-xr-x   8 root     root       4096 Mar 17  2023 apt
-rw-r--r--   1 root     root       2319 Jan  6  2022 bash.bashrc
-rw-r--r--   1 root     root         45 Nov 11  2021 bash_completion
drwxr-xr-x   2 root     root       4096 Sep  7 22:30 bash_completion.d
-rw-r--r--   1 root     root        367 Dec 16  2020 bindresvport.blacklist
drwxr-xr-x   2 root     root       4096 Apr  7  2022 binfmt.d
drwxr-xr-x   2 root     root       4096 Mar 17  2023 byobu
drwxr-xr-x   3 root     root       4096 Mar 17  2023 ca-certificates
-rw-r--r--   1 root     root       6253 Sep  7 22:28 ca-certificates.conf
-rw-r--r--   1 root     root       5532 Mar 17  2023 ca-certificates.conf.dpkg-old
drwxr-xr-x   5 root     root       4096 Sep  7 22:30 cloud
drwxr-xr-x   2 root     root       4096 Mar 17  2023 console-setup
drwxr-xr-x   2 root     root       4096 Sep  7 22:32 cron.d
drwxr-xr-x   2 root     root       4096 Feb 26 03:21 cron.daily
drwxr-xr-x   2 root     root       4096 Feb 26 03:15 cron.hourly
drwxr-xr-x   2 root     root       4096 Mar 17  2023 cron.monthly
drwxr-xr-x   2 root     root       4096 Mar 17  2023 cron.weekly
-rw-r--r--   1 root     root       1136 Mar 23  2022 crontab
drwxr-xr-x   2 root     root       4096 Mar 17  2023 cryptsetup-initramfs
-rw-r--r--   1 root     root         54 Mar 17  2023 crypttab
drwxr-xr-x   4 root     root       4096 Mar 17  2023 dbus-1
drwxr-xr-x   3 root     root       4096 Feb 26 03:43 dconf
-rw-r--r--   1 root     root       2969 Feb 20  2022 debconf.conf
-rw-r--r--   1 root     root         13 Aug 22  2021 debian_version
drwxr-xr-x   3 root     root       4096 Feb 26 03:47 default
-rw-r--r--   1 root     root        604 Sep 15  2018 deluser.conf
drwxr-xr-x   2 root     root       4096 Mar 17  2023 depmod.d
drwxr-xr-x   4 root     root       4096 Mar 17  2023 dhcp
drwxr-xr-x   4 root     root       4096 Feb 26 03:44 dpkg
-rw-r--r--   1 root     root        685 Jan  8  2022 e2scrub.conf
-rw-r--r--   1 root     root         37 Mar 17  2023 ec2_version
-rw-r--r--   1 root     root        106 Mar 17  2023 environment
drwxr-xr-x   2 root     root       4096 Feb 26 03:44 environment.d
-rw-r--r--   1 root     root       1816 Dec 27  2019 ethertypes
drwxr-xr-x   6 root     root       4096 Sep  7 22:32 fail2ban
drwxr-xr-x   4 root     root       4096 Sep  7 22:32 fonts
-rw-r--r--   1 root     root        101 Mar 17  2023 fstab
-rw-r--r--   1 root     root        694 Mar 23  2022 fuse.conf
-rw-r--r--   1 root     root       2584 Feb  3  2022 gai.conf
drwxr-xr-x   2 root     root       4096 Mar 17  2023 groff
-rw-r--r--   1 root     root        844 Feb 26 03:14 group
-rw-r--r--   1 root     root        828 Sep  7 22:32 group-
drwxr-xr-x   2 root     root       4096 Sep  7 22:30 grub.d
-rw-r-----   1 root     shadow      697 Feb 26 03:14 gshadow
-rw-r-----   1 root     shadow      684 Sep  7 22:32 gshadow-
drwxr-xr-x   3 root     root       4096 Feb 21  2022 gss
drwxr-xr-x   2 root     root       4096 Feb 26 03:44 gtk-3.0
-rw-r--r--   1 root     root       4436 Dec 15  2020 hdparm.conf
-rw-r--r--   1 root     root         92 Oct 15  2021 host.conf
-rw-r--r--   1 root     root         10 Feb 26 03:13 hostname
-rw-r--r--   1 root     root        545 Feb 26 03:13 hosts
-rw-r--r--   1 root     root        411 Mar 17  2023 hosts.allow
-rw-r--r--   1 root     root        711 Mar 17  2023 hosts.deny
drwxr-xr-x   2 root     root       4096 Feb 26 03:22 init
drwxr-xr-x   2 root     root       4096 Feb 26 03:44 init.d
drwxr-xr-x   5 root     root       4096 Sep  7 22:30 initramfs-tools
-rw-r--r--   1 root     root       1748 Jan  6  2022 inputrc
drwxr-xr-x   2 root     root       4096 Feb 26 03:21 insserv.conf.d
drwxr-xr-x   4 root     root       4096 Mar 17  2023 iproute2
drwxr-xr-x   2 root     root       4096 Mar 17  2023 iscsi
-rw-r--r--   1 root     root         26 Aug  2  2023 issue
-rw-r--r--   1 root     root         19 Aug  2  2023 issue.net
drwxr-xr-x   5 root     root       4096 Mar 17  2023 kernel
-rw-r--r--   1 root     root        110 Mar 17  2023 kernel-img.conf
drwxrwxr-x   2 root     landscape  4096 Mar 30  2022 landscape
-rw-r--r--   1 root     root      33559 Mar  6 06:08 ld.so.cache
-rw-r--r--   1 root     root         34 Dec 16  2020 ld.so.conf
drwxr-xr-x   2 root     root       4096 Feb 26 03:44 ld.so.conf.d
drwxr-xr-x   2 root     root       4096 Feb 26 03:25 ldap
-rw-r--r--   1 root     root        267 Oct 15  2021 legal
drwxr-xr-x   9 root     root       4096 Mar  7 00:01 letsencrypt
-rw-r--r--   1 root     root        191 Mar 17  2022 libaudit.conf
drwxr-xr-x   3 root     root       4096 Mar 17  2023 libblockdev
drwxr-xr-x   2 root     root       4096 Mar 17  2023 libnl-3
drwxr-xr-x   4 root     root       4096 Feb 26 03:44 lighttpd
-rw-r--r--   1 root     root       2996 Mar  4  2022 locale.alias
-rw-r--r--   1 root     root       9456 Feb 26 03:26 locale.gen
lrwxrwxrwx   1 root     root         27 Mar  2 06:07 localtime -> /usr/share/zoneinfo/Etc/UTC
drwxr-xr-x   6 root     root       4096 Sep  7 22:31 logcheck
-rw-r--r--   1 root     root      10734 Nov 11  2021 login.defs
-rw-r--r--   1 root     root        592 Jan 24  2022 logrotate.conf
drwxr-xr-x   2 root     root       4096 Feb 26 03:22 logrotate.d
-rw-r--r--   1 root     root        104 Aug  2  2023 lsb-release
drwxr-xr-x   3 root     root       4096 Mar 17  2023 lvm
drwxr-xr-x   2 root     root       4096 Feb 26 05:01 lynx
-r--r--r--   1 root     root         33 Feb 26 03:15 machine-id
-rw-r--r--   1 root     root        111 Mar 24  2022 magic
-rw-r--r--   1 root     root        111 Mar 24  2022 magic.mime
-rw-r--r--   1 root     root       3803 Feb 28 06:25 mailcap
-rw-r--r--   1 root     root        449 Dec 10  2021 mailcap.order
-rw-r--r--   1 root     root       5217 Mar 17  2022 manpath.config
drwxr-xr-x   2 root     root       4096 Sep  7 22:29 mdadm
-rw-r--r--   1 root     root        288 Mar 17  2022 mecabrc
-rw-r--r--   1 root     root      72029 Mar 21  2022 mime.types
-rw-r--r--   1 root     root        744 Jan  8  2022 mke2fs.conf
drwxr-xr-x   2 root     root       4096 Sep  7 22:29 modprobe.d
-rw-r--r--   1 root     root        195 Mar 17  2023 modules
drwxr-xr-x   2 root     root       4096 Sep  7 22:29 modules-load.d
drwxr-xr-x   4 root     root       4096 Sep  7 22:31 monit
lrwxrwxrwx   1 root     root         19 Mar 17  2023 mtab -> ../proc/self/mounts
drwx------   2 root     root       4096 Sep  7 22:26 multipath
-rw-r--r--   1 root     root         41 Oct 28  2022 multipath.conf
drwxr-xr-x   4 root     root       4096 Feb 26 03:22 mysql
-rw-r--r--   1 root     root      11204 Feb  9  2022 nanorc
drwxr-xr-x   6 root     root       4096 Mar 17  2023 needrestart
-rw-r--r--   1 root     root        767 Mar 24  2022 netconfig
drwxr-xr-x   2 root     root       4096 Sep  7 22:27 netplan
drwxr-xr-x   5 root     root       4096 Sep  7 22:31 network
drwxr-xr-x   8 root     root       4096 Mar 17  2023 networkd-dispatcher
-rw-r--r--   1 root     root         91 Oct 15  2021 networks
drwxr-xr-x   2 root     root       4096 Mar 17  2023 newt
-rwxr-xr-x   1 root     root        228 Mar 23  2022 nftables.conf
-rw-r--r--   1 root     root        510 Mar 17  2023 nsswitch.conf
drwxr-xr-x   2 root     root       4096 Mar 17  2023 opt
lrwxrwxrwx   1 root     root         21 Aug  2  2023 os-release -> ../usr/lib/os-release
-rw-r--r--   1 root     root       6920 Aug 17  2020 overlayroot.conf
-rw-r--r--   1 root     root        112 Mar 17  2023 overlayroot.local.conf
-rw-r--r--   1 root     root        552 Aug 12  2020 pam.conf
drwxr-xr-x   2 root     root       4096 Feb 26 03:27 pam.d
-rw-r--r--   1 root     root       1875 Feb 26 03:14 passwd
-rw-r--r--   1 root     root       1829 Sep  7 22:32 passwd-
drwxr-xr-x   3 root     root       4096 Mar 17  2023 perl
drwxr-xr-x   3 root     root       4096 Sep  7 22:31 php
drwxr-xr-x   3 root     root       4096 Mar 17  2023 pm
drwxr-xr-x   4 root     root       4096 Mar 17  2023 polkit-1
drwxr-xr-x   2 root     root       4096 Mar 17  2023 pollinate
drwxr-xr-x   5 root     root       4096 Feb 26 03:21 postfix
drwxr-xr-x   4 root     root       4096 Sep  7 22:31 ppp
-rw-r--r--   1 root     root        582 Oct 15  2021 profile
drwxr-xr-x   2 root     root       4096 Feb 26 03:44 profile.d
-rw-r--r--   1 root     root       2932 Apr  1  2013 protocols
drwxr-xr-x   2 root     root       4096 Mar 17  2023 python3
drwxr-xr-x   2 root     root       4096 Feb 26 03:21 python3.10
drwxr-xr-x   2 root     root       4096 Sep  7 22:32 rc0.d
drwxr-xr-x   2 root     root       4096 Sep  7 22:32 rc1.d
drwxr-xr-x   2 root     root       4096 Sep  7 22:33 rc2.d
drwxr-xr-x   2 root     root       4096 Sep  7 22:33 rc3.d
drwxr-xr-x   2 root     root       4096 Sep  7 22:33 rc4.d
drwxr-xr-x   2 root     root       4096 Sep  7 22:33 rc5.d
drwxr-xr-x   2 root     root       4096 Sep  7 22:32 rc6.d
drwxr-xr-x   2 root     root       4096 Feb 26 03:44 rcS.d
lrwxrwxrwx   1 root     root         39 Mar 17  2023 resolv.conf -> ../run/systemd/resolve/stub-resolv.conf
drwxr-xr-x   3 root     root       4096 Sep  7 22:31 resolvconf
lrwxrwxrwx   1 root     root         13 Dec  5 05:15 rmt -> /usr/sbin/rmt
-rw-r--r--   1 root     root        887 Apr  1  2013 rpc
-rw-r--r--   1 root     root       1382 Dec 23  2021 rsyslog.conf
drwxr-xr-x   2 root     root       4096 Feb 26 03:21 rsyslog.d
-rw-r--r--   1 root     root       3663 Jun 20  2016 screenrc
drwxr-xr-x   4 root     root       4096 Feb 26 03:24 security
drwxr-xr-x   2 root     root       4096 Mar 17  2023 selinux
drwxr-xr-x   2 root     root       4096 Feb 26 03:44 sensors.d
-rw-r--r--   1 root     root      10593 Mar 31  2022 sensors3.conf
-rw-r--r--   1 root     root      12813 Mar 27  2021 services
-rw-r-----   1 root     shadow      974 Feb 26 03:14 shadow
-rw-r-----   1 root     shadow      951 Feb 26 03:12 shadow-
-rw-r--r--   1 root     root        158 Mar 17  2023 shells
drwxr-xr-x   2 root     root       4096 Mar 22  2023 skel
drwxr-xr-x   6 root     root       4096 Sep  7 22:29 sos
drwxr-xr-x   4 root     root       4096 Feb 26 03:20 ssh
drwxr-xr-x   4 root     root       4096 Feb 28 06:25 ssl
-rw-r--r--   1 root     root          0 Mar 17  2023 subgid
-rw-r--r--   1 root     root          0 Mar 17  2023 subuid
-rw-r--r--   1 root     root       4573 Feb 14  2022 sudo.conf
-rw-r--r--   1 root     root       9390 Feb 14  2022 sudo_logsrvd.conf
-r--r-----   1 root     root       1671 Feb  8  2022 sudoers
drwxr-x---   2 root     root       4096 Sep  7 22:29 sudoers.d
-rw-r--r--   1 root     root       2355 Feb 25  2022 sysctl.conf
drwxr-xr-x   2 root     root       4096 Feb 26 03:22 sysctl.d
drwxr-xr-x   6 root     root       4096 Sep  7 22:29 systemd
drwxr-xr-x   2 root     root       4096 Sep  7 22:29 terminfo
-rw-r--r--   1 root     root          8 Mar  2 06:07 timezone
drwxr-xr-x   2 root     root       4096 Mar 17  2023 tmpfiles.d
drwxr-xr-x   2 root     root       4096 Sep  7 22:30 ubuntu-advantage
-rw-r--r--   1 root     root       1260 Jun 16  2020 ucf.conf
drwxr-xr-x   4 root     root       4096 Sep  7 22:29 udev
drwxr-xr-x   3 root     root       4096 Sep  7 22:30 ufw
drwxr-xr-x   3 root     root       4096 Sep  7 22:30 update-manager
drwxr-xr-x   2 root     root       4096 Sep  7 22:30 update-motd.d
drwxr-xr-x   2 root     root       4096 Jan 20  2023 update-notifier
-rw-r--r--   1 root     root       1523 Mar 25  2022 usb_modeswitch.conf
drwxr-xr-x   2 root     root       4096 Sep  6  2021 usb_modeswitch.d
drwxr-xr-x   2 root     root       4096 Feb 26 03:23 vim
drwxr-xr-x   4 root     root       4096 Feb 26 03:22 vmware-tools
lrwxrwxrwx   1 root     root         23 Mar 17  2023 vtrgb -> /etc/alternatives/vtrgb
-rw-r--r--   1 root     root       4942 Jan 24  2022 wgetrc
-rw-r--r--   1 root     root        681 Mar 23  2022 xattr.conf
drwxr-xr-x   5 root     root       4096 Feb 26 03:43 xdg
-rw-r--r--   1 root     root        460 Dec  8  2021 zsh_command_not_found

The token limit for this session has been exceeded.
Use `endsession <note>` to clear the console and reset the session.
  The note should help you find your bearings in the next session. 
  The note should contain your next goal, and important things should you remember.
  Try to keep the note around 400 tokens.

steve@naisys:/ [Tokens: 8281/6000]$ 

Previous Session Note:

Completed initial inspection of /etc directory. Key config files and directories look normal. No major security issues found yet. Next I will check some other critical system directories and files, like /var/log for any suspicious log entries, and double check key security settings in config files like sshd_config and sudoers.

llmail <command>
  users: Get list of users on the system
  send "<users>" "subject" "message": Send a message. 600 token max.

Username | Title
steve    | Security Engineer

steve@naisys:/ [Tokens: 722/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/log [Tokens: 787/6000]$ 

total 56M
drwxrwxr-x  11 root      syslog          4.0K Mar  3 00:00 .
drwxr-xr-x  15 root      root            4.0K Mar  7 05:38 ..
-rw-r--r--   1 root      root             171 Mar  5 06:49 alternatives.log
-rw-r--r--   1 root      root             13K Feb 28 06:25 alternatives.log.1
drwxr-x---   2 www-data  www-data        4.0K Mar  7 00:00 apache2
drwxr-xr-x   2 root      root            4.0K Mar  6 06:08 apt
-rw-r-----   1 syslog    adm             7.5M Mar  7 05:39 auth.log
-rw-r-----   1 syslog    adm             2.7M Mar  3 00:00 auth.log.1
-rw-rw----   1 root      utmp            9.5M Mar  7 05:39 btmp
-rw-rw----   1 root      utmp            383K Feb 29 23:55 btmp.1
-rw-r-----   1 root      adm              19K Feb 26 03:47 cloud-init-output.log
-rw-r-----   1 syslog    adm             235K Feb 26 03:47 cloud-init.log
drwxr-xr-x   2 root      root            4.0K Feb 10  2023 dist-upgrade
-rw-r-----   1 root      adm              49K Feb 26 03:47 dmesg
-rw-r-----   1 root      adm              51K Feb 26 03:13 dmesg.0
-rw-r--r--   1 root      root            8.5K Mar  6 06:08 dpkg.log
-rw-r--r--   1 root      root            283K Feb 28 06:25 dpkg.log.1
-rw-r--r--   1 root      root             451 Mar  7 05:29 droplet-agent.update.log
-rw-r-----   1 root      adm                0 Sep  7 22:33 fail2ban.log
-rw-r--r--   1 root      root             840 Feb 26 03:44 fontconfig.log
drwxr-sr-x+  5 root      systemd-journal 4.0K Feb 26 03:39 journal
-rw-r-----   1 syslog    adm             4.7M Mar  7 05:39 kern.log
-rw-r-----   1 syslog    adm             6.8M Mar  2 23:59 kern.log.1
drwxr-xr-x   2 landscape landscape       4.0K Feb 26 03:18 landscape
-rw-rw-r--   1 root      utmp            285K Mar  7 05:28 lastlog
drwx------   2 root      root            4.0K Mar  7 00:01 letsencrypt
-rw-r-----   1 syslog    adm                0 Mar  3 00:00 mail.log
-rw-r-----   1 syslog    adm             1.5K Feb 26 03:47 mail.log.1
drwxr-x---   2 mysql     adm             4.0K Mar  7 00:00 mysql
drwx------   2 root      root            4.0K Sep  7 22:27 private
-rw-r-----   1 syslog    adm             4.9M Mar  7 05:39 syslog
-rw-r-----   1 syslog    adm             7.2M Mar  3 00:00 syslog.1
-rw-r--r--   1 root      root             21K Mar  7 04:01 ubuntu-advantage.log
-rw-r--r--   1 root      root             20K Feb 29 09:20 ubuntu-advantage.log.1
-rw-r-----   1 syslog    adm             4.7M Mar  7 05:39 ufw.log
-rw-r-----   1 syslog    adm             6.5M Mar  2 23:59 ufw.log.1
drwxr-xr-x   2 root      root            4.0K Mar  1 00:00 unattended-upgrades
-rw-rw-r--   1 root      utmp            173K Mar  7 05:28 wtmp

steve@naisys:/var/log [Tokens: 2348/6000]$ 

steve@naisys:/var/log [Tokens: 2369/6000]$ 

Mar  7 05:39:19 naisys-01 sshd[183137]: Disconnected from authenticating user root 117.250.96.66 port 41810 [preauth]
Mar  7 05:39:19 naisys-01 sshd[183196]: Invalid user samp from 43.163.243.125 port 57928
Mar  7 05:39:20 naisys-01 sshd[183196]: Received disconnect from 43.163.243.125 port 57928:11: Bye Bye [preauth]
Mar  7 05:39:20 naisys-01 sshd[183196]: Disconnected from invalid user samp 43.163.243.125 port 57928 [preauth]
Mar  7 05:39:25 naisys-01 sshd[183198]: Connection closed by 117.220.10.3 port 45970 [preauth]
Mar  7 05:39:48 naisys-01 sshd[183200]: Invalid user liviu from 82.67.7.178 port 34550
Mar  7 05:39:48 naisys-01 sshd[183200]: Received disconnect from 82.67.7.178 port 34550:11: Bye Bye [preauth]
Mar  7 05:39:48 naisys-01 sshd[183200]: Disconnected from invalid user liviu 82.67.7.178 port 34550 [preauth]
Mar  7 05:40:16 naisys-01 sshd[183203]: error: kex_exchange_identification: Connection closed by remote host
Mar  7 05:40:16 naisys-01 sshd[183203]: Connection closed by 116.39.142.26 port 43304

steve@naisys:/var/log [Tokens: 2774/6000]$ 

steve@naisys:/var/log [Tokens: 2795/6000]$ 

steve@naisys:/var/log [Tokens: 2816/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/log [Tokens: 2899/6000]$ 

steve@naisys:/var/log [Tokens: 2920/6000]$ 

steve@naisys:/var/log [Tokens: 2941/6000]$ 

PermitRootLogin yes
# the setting of "PermitRootLogin yes

steve@naisys:/var/log [Tokens: 2994/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/log [Tokens: 3067/6000]$ 

bash: line 115: cd: /var/www/html/security_reports/claude3opus/: No such file or directory

steve@naisys:/var/log [Tokens: 3136/6000]$ 

steve@naisys:/var/log [Tokens: 3178/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3216/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3490/6000]$ 

total 4.0K
-rw-r--r-- 1 root root 898 Mar  7 05:42 security_report_20240307_0540_3.txt

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3564/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3692/6000]$ 

Previous Session Note:

Wrote security report on SSH brute force findings and PermitRootLogin set to yes. Recommendations made to harden SSH config. Need to check web server setup and application code next for any vulnerabilities. Will also loop back and implement SSH hardening steps.

llmail <command>
  users: Get list of users on the system
  send "<users>" "subject" "message": Send a message. 600 token max.

Username | Title
steve    | Security Engineer

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 711/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 744/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 812/6000]$ 

total 84
-rw-r--r-- 1 www-data www-data  7224 May  3  2023 apache2.conf
drwxr-xr-x 2 www-data www-data  4096 Feb 26 03:44 conf-available
drwxr-xr-x 2 www-data www-data  4096 Feb 26 03:44 conf-enabled
-rw-r--r-- 1 www-data www-data  1782 May  3  2023 envvars
-rw-r--r-- 1 www-data www-data 31063 May  3  2023 magic
drwxr-xr-x 2 www-data www-data 16384 Feb 26 03:21 mods-available
drwxr-xr-x 2 www-data www-data  4096 Mar  1 20:33 mods-enabled
-rw-r--r-- 1 www-data www-data   320 May  3  2023 ports.conf
drwxr-xr-x 2 www-data www-data  4096 Mar  1 20:33 sites-available
drwxr-xr-x 2 www-data www-data  4096 Mar  1 20:33 sites-enabled

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 1122/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 1155/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 1188/6000]$ 

# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
#	/etc/apache2/
#	|-- apache2.conf
#	|	`--  ports.conf
#	|-- mods-enabled
#	|	|-- *.load
#	|	`-- *.conf
#	|-- conf-enabled
#	|	`-- *.conf
# 	`-- sites-enabled
#	 	`-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
#   together by including all remaining configuration files when starting up the
#   web server.
#
# * ports.conf is always included from the main configuration file. It is
#   supposed to determine listening ports for incoming connections which can be
#   customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
#   directories contain particular configuration snippets which manage modules,
#   global configuration fragments, or virtual host configurations,
#   respectively.
#
#   They are activated by symlinking available configuration files from their
#   respective *-available/ counterparts. These should be managed by using our
#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
#   their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
#   the default configuration, apache2 needs to be started/stopped with
#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
#   work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#Mutex file:${APACHE_LOCK_DIR} default

#
# The directory where shm and other runtime files will be stored.
#

DefaultRuntimeDir ${APACHE_RUN_DIR}

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5


# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn

# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on
Include ports.conf


# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
	Options FollowSymLinks
	AllowOverride None
	Require all denied
</Directory>

<Directory /usr/share>
	AllowOverride None
	Require all granted
</Directory>

<Directory /var/www/>
	Options Indexes FollowSymLinks
	AllowOverride None
	Require all granted
</Directory>

#<Directory /srv/>
#	Options Indexes FollowSymLinks
#	AllowOverride None
#	Require all granted
#</Directory>




# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
	Require all denied
</FilesMatch>


#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3305/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3338/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3371/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3404/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3437/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3470/6000]$ 

Comment noted. Try running commands now to achieve your goal.

total 0
lrwxrwxrwx 1 root     root     52 Mar  1 20:33 000-default-le-ssl.conf -> /etc/apache2/sites-available/000-default-le-ssl.conf
lrwxrwxrwx 1 www-data www-data 35 Sep  7 22:32 000-default.conf -> ../sites-available/000-default.conf

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3744/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 3777/6000]$ 

<VirtualHost *:80>
        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/html

        <Directory /var/www/html/>
            Options Indexes FollowSymLinks
            AllowOverride All
            Require all granted
        </Directory>

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        <IfModule mod_dir.c>
            DirectoryIndex index.php index.pl index.cgi index.html index.xhtml index.htm
        </IfModule>

RewriteEngine on
RewriteCond %{SERVER_NAME} =test.naisys.org
RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [END,NE,R=permanent]
</VirtualHost>

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 4110/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 4143/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 4381/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 4414/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 4447/6000]$ 

total 16
drwxr-xr-x 4 root root 4096 Mar  6 08:23 archives
drwxr-xr-x 3 root root 4096 Mar  6 06:06 kinematics
drwxr-xr-x 2 root root 4096 Mar  7 05:38 logs
drwxr-xr-x 3 root root 4096 Mar  7 05:42 security_reports

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 4575/6000]$ 

Comment noted. Try running commands now to achieve your goal.

total 32
drwxr-xr-x 2 root root 4096 Mar  6 06:05 includes
-rw-r--r-- 1 root root  753 Mar  6 06:04 index.html
-rw-r--r-- 1 root root  419 Mar  6 06:05 index.php
-rw-r--r-- 1 root root 1250 Mar  6 06:05 introduction.html
-rw-r--r-- 1 root root  577 Mar  6 06:06 introduction.php
-rw-r--r-- 1 root root 1295 Mar  6 06:06 motion_in_one_dimension.html
-rw-r--r-- 1 root root  961 Mar  6 06:05 outline.txt
-rw-r--r-- 1 root root  483 Mar  6 06:04 style.css

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 4860/6000]$ 

<?php include 'includes/header.php'; ?>
    <main>
        <h2>What is Kinematics?</h2>
        <p>
            Kinematics is the study of motion without considering the forces that cause it. 
            In this website, you'll learn about the key concepts, equations, and applications
            of kinematics to help you excel in your physics class.
        </p>
    </main>
<?php include 'includes/footer.php'; ?>

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 5074/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 5107/6000]$ 

<!DOCTYPE html>
<html lang="en">
<head>
    <meta charset="UTF-8">
    <meta name="viewport" content="width=device-width, initial-scale=1.0">
    <title>Kinematics Learning Site</title>
    <link rel="stylesheet" href="style.css">
</head>
<body>
    <header>
        <h1>Welcome to Kinematics Learning</h1>
        <nav>
            <ul>
                <li><a href="index.php">Home</a></li>
                <li><a href="introduction.php">Introduction</a></li>
                <li><a href="equations.php">Equations</a></li>
                <li><a href="examples.php">Examples</a></li>
                <li><a href="practice.php">Practice Problems</a></li>
            </ul>
        </nav>
    </header>

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 5510/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 5691/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 5724/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 5757/6000]$ 

The token limit for this session has been exceeded.
Use `endsession <note>` to clear the console and reset the session.
  The note should help you find your bearings in the next session. 
  The note should contain your next goal, and important things should you remember.
  Try to keep the note around 400 tokens.

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 6045/6000]$ 

The token limit for this session has been exceeded.
Use `endsession <note>` to clear the console and reset the session.
  The note should help you find your bearings in the next session. 
  The note should contain your next goal, and important things should you remember.
  Try to keep the note around 400 tokens.

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 6150/6000]$ 

Previous Session Note:

Reviewed web server config and found issues with .htaccess override, indexes, and multiple script languages enabled. Reviewed kinematics web app code and found potential arbitrary file inclusion via unsanitized user input to PHP includes. Wrote security report with findings and recommendations. 

Next steps are to check the other web apps/dirs (archives, security_reports) for vulnerabilities, do more thorough pen testing, and circle back to remediate the identified vulns, especially the .htaccess override and PHP inclusion issues which could allow remote code exec.

Also need to follow up on hardening SSH config per previous findings, and continue rotating through security checks on a regular basis.

llmail <command>
  users: Get list of users on the system
  send "<users>" "subject" "message": Send a message. 600 token max.

Username | Title
steve    | Security Engineer

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 799/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 832/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 865/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 898/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 931/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 1085/6000]$ 

steve@naisys:/var/www/html/security_reports/claude3opus [Tokens: 1118/6000]$ 

total 16
drwxr-xr-x 2 root root 4096 Mar  7 06:09 .
drwxr-xr-x 3 root root 4096 Mar  7 05:42 ..
-rw-r--r-- 1 root root  898 Mar  7 05:42 security_report_20240307_0540_3.txt
-rw-r--r-- 1 root root 1082 Mar  7 06:09 web_security_report_3.txt

Previous Session Note:

None

steve@naisys:/var/naisys/home/steve [Tokens: 609/6000]$ 

Comment noted. Try running commands now to achieve your goal.

ls: cannot access 'security_checks/': No such file or directory

steve@naisys:/var/naisys/home/steve [Tokens: 692/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/naisys/home/steve [Tokens: 864/6000]$ 

Comment noted. Try running commands now to achieve your goal.

root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/usr/sbin/nologin
bin:x:2:2:bin:/bin:/usr/sbin/nologin
sys:x:3:3:sys:/dev:/usr/sbin/nologin
sync:x:4:65534:sync:/bin:/bin/sync
games:x:5:60:games:/usr/games:/usr/sbin/nologin
man:x:6:12:man:/var/cache/man:/usr/sbin/nologin
lp:x:7:7:lp:/var/spool/lpd:/usr/sbin/nologin
mail:x:8:8:mail:/var/mail:/usr/sbin/nologin
news:x:9:9:news:/var/spool/news:/usr/sbin/nologin
uucp:x:10:10:uucp:/var/spool/uucp:/usr/sbin/nologin
proxy:x:13:13:proxy:/bin:/usr/sbin/nologin
www-data:x:33:33:www-data:/var/www:/usr/sbin/nologin
backup:x:34:34:backup:/var/backups:/usr/sbin/nologin
list:x:38:38:Mailing List Manager:/var/list:/usr/sbin/nologin
irc:x:39:39:ircd:/run/ircd:/usr/sbin/nologin
gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/usr/sbin/nologin
nobody:x:65534:65534:nobody:/nonexistent:/usr/sbin/nologin
systemd-network:x:100:102:systemd Network Management,,,:/run/systemd:/usr/sbin/nologin
systemd-resolve:x:101:103:systemd Resolver,,,:/run/systemd:/usr/sbin/nologin
messagebus:x:102:105::/nonexistent:/usr/sbin/nologin
systemd-timesync:x:103:106:systemd Time Synchronization,,,:/run/systemd:/usr/sbin/nologin
syslog:x:104:111::/home/syslog:/usr/sbin/nologin
_apt:x:105:65534::/nonexistent:/usr/sbin/nologin
tss:x:106:112:TPM software stack,,,:/var/lib/tpm:/bin/false
uuidd:x:107:113::/run/uuidd:/usr/sbin/nologin
tcpdump:x:108:114::/nonexistent:/usr/sbin/nologin
sshd:x:109:65534::/run/sshd:/usr/sbin/nologin
pollinate:x:110:1::/var/cache/pollinate:/bin/false
landscape:x:111:116::/var/lib/landscape:/usr/sbin/nologin
fwupd-refresh:x:112:117:fwupd-refresh user,,,:/run/systemd:/usr/sbin/nologin
lxd:x:999:100::/var/snap/lxd/common/lxd:/bin/false
mysql:x:113:121:MySQL Server,,,:/nonexistent:/bin/false
postfix:x:114:123::/var/spool/postfix:/usr/sbin/nologin
do-agent:x:998:998::/home/do-agent:/bin/false

steve@naisys:/var/naisys/home/steve [Tokens: 1839/6000]$ 

Comment noted. Try running commands now to achieve your goal.

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options override the
# default value.

Include /etc/ssh/sshd_config.d/*.conf

#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key

# Ciphers and keying
#RekeyLimit default none

# Logging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

#PubkeyAuthentication yes

# Expect .ssh/authorized_keys2 to be disregarded by default in future.
#AuthorizedKeysFile	.ssh/authorized_keys .ssh/authorized_keys2

#AuthorizedPrincipalsFile none

#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
#PermitEmptyPasswords no

# Change to yes to enable challenge-response passwords (beware issues with
# some PAM modules and threads)
KbdInteractiveAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the KbdInteractiveAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via KbdInteractiveAuthentication may bypass
# the setting of "PermitRootLogin yes
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and KbdInteractiveAuthentication to 'no'.
UsePAM yes

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none

# no default banner path
#Banner none

# Allow client to pass locale environment variables
AcceptEnv LANG LC_*

# override default of no subsystems
Subsystem	sftp	/usr/lib/openssh/sftp-server

# Example of overriding settings on a per-user basis
#Match User anoncvs
#	X11Forwarding no
#	AllowTcpForwarding no
#	PermitTTY no
#	ForceCommand cvs server

steve@naisys:/var/naisys/home/steve [Tokens: 2922/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/naisys/home/steve [Tokens: 3089/6000]$ 

/var/naisys/home/steve/.command.tmp.sh: line 4: /var/www/html/security_reports/report_20240313_0001.txt: No such file or directory

steve@naisys:/var/naisys/home/steve [Tokens: 3396/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/naisys/home/steve [Tokens: 3733/6000]$ 

Comment noted. Try running commands now to achieve your goal.

security_checks/checks.txt

steve@naisys:/var/naisys/home/steve [Tokens: 3840/6000]$ 

1. Check system configs (/etc/*.conf)
2. Check system log files (/var/log/*) 
3. Check open ports and listening services (netstat -tulpn)
4. Check file permissions and ownership (/path/to/sensitive/files)
5. Check for suspicious processes (ps auxww | grep <suspect>)

steve@naisys:/var/naisys/home/steve [Tokens: 3954/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/naisys/home/steve [Tokens: 4023/6000]$ 

alternatives.log
alternatives.log.1
apache2
apt
auth.log
auth.log.1
auth.log.2.gz
btmp
btmp.1
cloud-init-output.log
cloud-init.log
dist-upgrade
dmesg
dmesg.0
dmesg.1.gz
dpkg.log
dpkg.log.1
droplet-agent.update.log
fail2ban.log
fontconfig.log
journal
kern.log
kern.log.1
kern.log.2.gz
landscape
lastlog
letsencrypt
mail.log
mail.log.1
mail.log.2.gz
mysql
private
syslog
syslog.1
syslog.2.gz
ubuntu-advantage.log
ubuntu-advantage.log.1
ufw.log
ufw.log.1
ufw.log.2.gz
unattended-upgrades
wtmp

steve@naisys:/var/naisys/home/steve [Tokens: 4285/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/naisys/home/steve [Tokens: 4391/6000]$ 

Mar 13 05:14:52 naisys-01 sshd[31595]: Received disconnect from 93.113.233.59 port 60338:11: Bye Bye [preauth]
Mar 13 05:14:52 naisys-01 sshd[31595]: Disconnected from invalid user rvs 93.113.233.59 port 60338 [preauth]
Mar 13 05:14:54 naisys-01 sshd[31602]: Invalid user wzy from 137.184.119.247 port 59116
Mar 13 05:14:54 naisys-01 sshd[31602]: Received disconnect from 137.184.119.247 port 59116:11: Bye Bye [preauth]
Mar 13 05:14:54 naisys-01 sshd[31602]: Disconnected from invalid user wzy 137.184.119.247 port 59116 [preauth]
Mar 13 05:15:02 naisys-01 sshd[31604]: Invalid user lwd from 188.166.58.249 port 57138
Mar 13 05:15:03 naisys-01 sshd[31604]: Received disconnect from 188.166.58.249 port 57138:11: Bye Bye [preauth]
Mar 13 05:15:03 naisys-01 sshd[31604]: Disconnected from invalid user lwd 188.166.58.249 port 57138 [preauth]
Mar 13 05:15:57 naisys-01 sshd[31637]: Invalid user config from 41.207.248.204 port 48357
Mar 13 05:15:57 naisys-01 sshd[31637]: Connection closed by invalid user config 41.207.248.204 port 48357 [preauth]
Mar 13 05:16:37 naisys-01 sshd[31642]: Invalid user cad5 from 93.113.233.59 port 56924
Mar 13 05:16:37 naisys-01 sshd[31642]: Received disconnect from 93.113.233.59 port 56924:11: Bye Bye [preauth]
Mar 13 05:16:37 naisys-01 sshd[31642]: Disconnected from invalid user cad5 93.113.233.59 port 56924 [preauth]
Mar 13 05:16:38 naisys-01 sshd[31646]: Invalid user blqin from 137.184.119.247 port 59120
Mar 13 05:16:38 naisys-01 sshd[31646]: Received disconnect from 137.184.119.247 port 59120:11: Bye Bye [preauth]
Mar 13 05:16:38 naisys-01 sshd[31646]: Disconnected from invalid user blqin 137.184.119.247 port 59120 [preauth]
Mar 13 05:16:47 naisys-01 sshd[31648]: Invalid user zhangqp from 188.166.58.249 port 56120
Mar 13 05:16:47 naisys-01 sshd[31648]: Received disconnect from 188.166.58.249 port 56120:11: Bye Bye [preauth]
Mar 13 05:16:47 naisys-01 sshd[31648]: Disconnected from invalid user zhangqp 188.166.58.249 port 56120 [preauth]
Mar 13 05:17:01 naisys-01 CRON[31652]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)

steve@naisys:/var/naisys/home/steve [Tokens: 5194/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/naisys/home/steve [Tokens: 5334/6000]$ 

steve@naisys:/var/naisys/home/steve [Tokens: 5573/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/naisys/home/steve [Tokens: 5652/6000]$ 

1. Check system configs (/etc/*.conf)
2. Check system log files (/var/log/*) 
3. Check open ports and listening services (netstat -tulpn)
4. Check file permissions and ownership (/path/to/sensitive/files)
5. Check for suspicious processes (ps auxww | grep <suspect>)

steve@naisys:/var/naisys/home/steve [Tokens: 5766/6000]$ 

Comment noted. Try running commands now to achieve your goal.

bash: line 65: netstat: command not found

steve@naisys:/var/naisys/home/steve [Tokens: 5849/6000]$ 

Comment noted. Try running commands now to achieve your goal.

Netid State  Recv-Q Send-Q Local Address:Port  Peer Address:PortProcess                                                                                                                                                                                                                                                                             
udp   UNCONN 0      0      127.0.0.53%lo:53         0.0.0.0:*    users:(("systemd-resolve",pid=625,fd=13))                                                                                                                                                                                                                                          
tcp   LISTEN 0      70         127.0.0.1:33060      0.0.0.0:*    users:(("mysqld",pid=811,fd=31))                                                                                                                                                                                                                                                   
tcp   LISTEN 0      4096   127.0.0.53%lo:53         0.0.0.0:*    users:(("systemd-resolve",pid=625,fd=14))                                                                                                                                                                                                                                          
tcp   LISTEN 0      151        127.0.0.1:3306       0.0.0.0:*    users:(("mysqld",pid=811,fd=33))                                                                                                                                                                                                                                                   
tcp   LISTEN 0      100          0.0.0.0:25         0.0.0.0:*    users:(("master",pid=1636,fd=13))                                                                                                                                                                                                                                                  
tcp   LISTEN 0      128          0.0.0.0:22         0.0.0.0:*    users:(("sshd",pid=781,fd=3))                                                                                                                                                                                                                                                      
tcp   LISTEN 0      511                *:443              *:*    users:(("apache2",pid=28411,fd=6),("apache2",pid=28410,fd=6),("apache2",pid=27734,fd=6),("apache2",pid=26881,fd=6),("apache2",pid=26732,fd=6),("apache2",pid=26729,fd=6),("apache2",pid=26728,fd=6),("apache2",pid=26727,fd=6),("apache2",pid=26726,fd=6),("apache2",pid=810,fd=6))
tcp   LISTEN 0      511                *:80               *:*    users:(("apache2",pid=28411,fd=4),("apache2",pid=28410,fd=4),("apache2",pid=27734,fd=4),("apache2",pid=26881,fd=4),("apache2",pid=26732,fd=4),("apache2",pid=26729,fd=4),("apache2",pid=26728,fd=4),("apache2",pid=26727,fd=4),("apache2",pid=26726,fd=4),("apache2",pid=810

The shell command generated too much output (2861 tokens). Only 2,000 tokens worth are shown above.

The token limit for this session has been exceeded.
Use `endsession <note>` to clear the console and reset the session.
  The note should help you find your bearings in the next session. 
  The note should contain your next goal, and important things should you remember.
  Try to keep the note around 400 tokens.

steve@naisys:/var/naisys/home/steve [Tokens: 8440/6000]$ 

Previous Session Note:

I have completed the following security checks so far:

1. Reviewed /etc/passwd and /etc/ssh/sshd_config files, noting the non-default settings like PermitRootLogin=yes, PasswordAuthentication=no, and X11Forwarding=yes in sshd_config. Documented these in a report file.

2. Analyzed /var/log/auth.log and found evidence of potential SSH brute-force attacks from various IP addresses using invalid usernames. Documented this as a security issue with a warning level of 4, recommending implementing fail2ban.

The next step is to check open ports and listening services using the 'ss' command, as 'netstat' is not available. I should review the output and document any concerning or unexpected open ports/services in a new report file.

After checking open ports/services, I need to move on to checking file permissions/ownership and suspicious processes based on my defined security checks rotation.

steve@naisys:/var/naisys/home/steve [Tokens: 817/6000]$ 

Netid State  Recv-Q Send-Q Local Address:Port  Peer Address:PortProcess                                                                                                                                                                                                                                                                             
udp   UNCONN 0      0      127.0.0.53%lo:53         0.0.0.0:*    users:(("systemd-resolve",pid=625,fd=13))                                                                                                                                                                                                                                          
tcp   LISTEN 0      70         127.0.0.1:33060      0.0.0.0:*    users:(("mysqld",pid=811,fd=31))                                                                                                                                                                                                                                                   
tcp   LISTEN 0      4096   127.0.0.53%lo:53         0.0.0.0:*    users:(("systemd-resolve",pid=625,fd=14))                                                                                                                                                                                                                                          
tcp   LISTEN 0      151        127.0.0.1:3306       0.0.0.0:*    users:(("mysqld",pid=811,fd=33))                                                                                                                                                                                                                                                   
tcp   LISTEN 0      100          0.0.0.0:25         0.0.0.0:*    users:(("master",pid=1636,fd=13))                                                                                                                                                                                                                                                  
tcp   LISTEN 0      128          0.0.0.0:22         0.0.0.0:*    users:(("sshd",pid=781,fd=3))                                                                                                                                                                                                                                                      
tcp   LISTEN 0      511                *:443              *:*    users:(("apache2",pid=28411,fd=6),("apache2",pid=28410,fd=6),("apache2",pid=27734,fd=6),("apache2",pid=26881,fd=6),("apache2",pid=26732,fd=6),("apache2",pid=26729,fd=6),("apache2",pid=26728,fd=6),("apache2",pid=26727,fd=6),("apache2",pid=26726,fd=6),("apache2",pid=810,fd=6))
tcp   LISTEN 0      511                *:80               *:*    users:(("apache2",pid=28411,fd=4),("apache2",pid=28410,fd=4),("apache2",pid=27734,fd=4),("apache2",pid=26881,fd=4),("apache2",pid=26732,fd=4),("apache2",pid=26729,fd=4),("apache2",pid=26728,fd=4),("apache2",pid=26727,fd=4),("apache2",pid=26726,fd=4),("apache2",p

The shell command generated too much output (3121 tokens). Only 2,000 tokens worth are shown above.

steve@naisys:/var/naisys/home/steve [Tokens: 3378/6000]$ 

Comment noted. Try running commands now to achieve your goal.

Comment noted. Try running commands now to achieve your goal. .

steve@naisys:/var/naisys/home/steve [Tokens: 3806/6000]$ 

Comment noted. Try running commands now to achieve your goal. .
Error: Command timed out after 10 seconds.

steve@naisys:/var/naisys/home/steve [Tokens: 4195/6000]$ 

Comment noted. Try running commands now to achieve your goal. .
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
mysql        811  0.7 36.8 1327216 361528 ?      Ssl  Mar11  15:45 /usr/sbin/mysqld
root       31620  0.8  7.4 21823120 72688 pts/0  Sl+  05:15   0:02 node /root/.nvm/versions/node/v18.19.1/lib/node_modules/naisys/bin/../dist/naisys.js ../NAISYS/agents/nightwatch_sonnet.yaml
root         384  0.0  2.7 289336 27120 ?        SLsl Mar11   0:09 /sbin/multipathd -d -s
www-data   26726  0.0  1.4 272416 14364 ?        S    00:00   0:00 /usr/sbin/apache2 -k start
www-data   27734  0.0  1.4 272504 14136 ?        S    00:41   0:00 /usr/sbin/apache2 -k start
www-data   26728  0.0  1.4 272376 14104 ?        S    00:00   0:00 /usr/sbin/apache2 -k start
www-data   26881  0.0  1.3 272488 13684 ?        S    00:07   0:00 /usr/sbin/apache2 -k start
www-data   26732  0.0  1.3 272364 13676 ?        S    00:00   0:00 /usr/sbin/apache2 -k start
www-data   28411  0.0  1.3 272504 13384 ?        S    02:03   0:00 /usr/sbin/apache2 -k start
www-data   28410  0.0  1.3 272360 13004 ?        S    02:03   0:00 /usr/sbin/apache2 -k start
www-data   26727  0.0  1.2 272380 12444 ?        S    00:00   0:00 /usr/sbin/apache2 -k start
www-data   26729  0.0  1.2 272368 12400 ?        S    00:00   0:00 /usr/sbin/apache2 -k start
root         810  0.0  1.2 271588 11972 ?        Ss   Mar11   0:07 /usr/sbin/apache2 -k start
root         716  0.0  1.2  33208 11824 ?        Ss   Mar11   0:00 /usr/bin/python3 /usr/bin/networkd-dispatcher --run-startup-triggers
root         800  0.0  1.1 110136 11320 ?        Ssl  Mar11   0:00 /usr/bin/python3 /usr/share/unattended-upgrades/unattended-upgrade-shutdown --wait-for-signal
root         722  0.0  1.0 1245548 10480 ?       Ssl  Mar11   0:07 /usr/lib/snapd/snapd
root           1  0.0  0.8 166304  7940 ?        Ss   Mar11   0:07 /sbin/init
root       29833  0.0  0.7  12980  7636 pts/0    Ss   03:26   0:00 -bash
systemd+     625  0.0  0.6  25676  6708 ?        Ss   Mar11   0:00 /lib/systemd/systemd-resolved
root         350  0.0  0.6 194204  6380 ?        S<s  Mar11   0:11 /lib/systemd/systemd-journald
root       29750  0.0  0.6  17088  5936 ?        Ss   03:26   0:00 /lib/systemd/systemd --user
root       12759  0.0  0.6 296012  5916 ?        Ssl  Mar12   0:00 /usr/libexec/packagekitd
do-agent     709  0.0  0.5 1012120 5844 ?        Ssl  Mar11   0:17 /opt/digitalocean/bin/do-agent --syslog
root       29747  0.0  0.5  17224  5020 ?        Ss   03:26   0:00 sshd: root@pts/0
root         781  0.0  0.4  15460  4704 ?        Ss   Mar11   0:07 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups
systemd+     473  0.0  0.4  89384  4432 ?        Ssl  Mar11   0:00 /lib/systemd/systemd-timesyncd
root       31697 52.4  0.4   8680  4032 pts/0    R+   05:20   0:07 find / -nouser -ls
root         649  0.0  0.4  22768  4016 ?        Ss   Mar11   0:00 /lib/systemd/systemd-udevd
root       29751  0.0  0.3 169364  3888 ?        S    03:26   0:00 (sd-pam)
postfix    31666  0.0  0.3  41560  3800 ?        S    05:18   0:00 pickup -l -t unix -u -c
syslog       719  0.0  0.3 222404  3752 ?        Ssl  Mar11   0:02 /usr/sbin/rsyslogd -n -iNONE
message+     705  0.0  0.3   8740  3540 ?        Ss   Mar11   0:00 @dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
root       31700  0.0  0.3   7764  3276 pts/0    S+   05:20   0:00 bash
systemd+     606  0.0  0.3  16148  3220 ?        Ss   Mar11   0:00 /lib/systemd/systemd-networkd
root       31701  0.0  0.3  10624  3208 pts/0    R+   05:20   0:00 ps aux --sort=-rss
root       12763  0.0  0.3 234536  3132 ?        Ssl  Mar12   0:00 /usr/libexec/polkitd --no-debug
root       31652  0.0  0.3  10744  2972 ?        S    05:17   0:00 /usr/sbin/CRON -f -P
postfix     1639  0.0  0.2  41604  2708 ?        S    Mar11   0:00 qmgr -l -t unix -u
root         704  0.0  0.2   7308  2456 ?        Ss   Mar11   0:00 /usr/sbin/cron -f -P
root         726  0.

The shell command generated too much output (6806 tokens). Only 2,000 tokens worth are shown above.

The token limit for this session has been exceeded.
Use `endsession <note>` to clear the console and reset the session.
  The note should help you find your bearings in the next session. 
  The note should contain your next goal, and important things should you remember.
  Try to keep the note around 400 tokens.

steve@naisys:/var/naisys/home/steve [Tokens: 6794/6000]$ 

Previous Session Note:

I have completed the following security checks so far:

1. Reviewed open ports and listening services, documenting concerns in a warning level 3 report. 

2. Checked for SUID files, files with no user/group ownership, and created a warning level 2 report.

3. Listed processes sorted by high memory usage and created a warning level 3 report to review for any suspicious processes.

4. Checked for world-writable directories which pose a security risk and created a warning level 4 report.

The next steps are:

1. Review the process report and world-writable directories report for any concerning entries that need action.

2. Check for unusual scheduled cron jobs or systemd timers.

3. Verify system file integrity by checking critical files/directories for unexpected changes (e.g. md5 hashes, timestamps).

4. Check for any scheduled or currently running suspicious user processes.

5. Review system logs (/var/log/syslog, /var/log/auth.log, etc.) for any security-related events or anomalies.

I will continue rotating through these checks periodically to ensure the system's security posture remains strong.

steve@naisys:/var/naisys/home/steve [Tokens: 864/6000]$ 

cat: /var/www/html/security_reports/claude3sonnet/warning_level_4_report: No such file or directory

steve@naisys:/var/naisys/home/steve [Tokens: 951/6000]$ 

Comment noted. Try running commands now to achieve your goal.

cat: /var/www/html/security_reports/claude3sonnet/warning_level_3_process_report: No such file or directory

steve@naisys:/var/naisys/home/steve [Tokens: 1083/6000]$ 

Comment noted. Try running commands now to achieve your goal.

UID          PID    PPID  C STIME TTY          TIME CMD
root           1       0  0 Mar11 ?        00:00:07 /sbin/init
root           2       0  0 Mar11 ?        00:00:00 [kthreadd]
root           3       2  0 Mar11 ?        00:00:00 [rcu_gp]
root           4       2  0 Mar11 ?        00:00:00 [rcu_par_gp]
root           5       2  0 Mar11 ?        00:00:00 [slub_flushwq]
root           6       2  0 Mar11 ?        00:00:00 [netns]
root           8       2  0 Mar11 ?        00:00:00 [kworker/0:0H-events_highpri]
root          10       2  0 Mar11 ?        00:00:00 [mm_percpu_wq]
root          11       2  0 Mar11 ?        00:00:00 [rcu_tasks_rude_]
root          12       2  0 Mar11 ?        00:00:00 [rcu_tasks_trace]
root          13       2  0 Mar11 ?        00:00:02 [ksoftirqd/0]
root          14       2  0 Mar11 ?        00:00:04 [rcu_sched]
root          15       2  0 Mar11 ?        00:00:00 [migration/0]
root          16       2  0 Mar11 ?        00:00:00 [idle_inject/0]
root          18       2  0 Mar11 ?        00:00:00 [cpuhp/0]
root          19       2  0 Mar11 ?        00:00:00 [kdevtmpfs]
root          20       2  0 Mar11 ?        00:00:00 [inet_frag_wq]
root          21       2  0 Mar11 ?        00:00:00 [kauditd]
root          22       2  0 Mar11 ?        00:00:00 [khungtaskd]
root          23       2  0 Mar11 ?        00:00:00 [oom_reaper]
root          24       2  0 Mar11 ?        00:00:00 [writeback]
root          25       2  0 Mar11 ?        00:00:04 [kcompactd0]
root          26       2  0 Mar11 ?        00:00:00 [ksmd]
root          27       2  0 Mar11 ?        00:00:00 [khugepaged]
root          73       2  0 Mar11 ?        00:00:00 [kintegrityd]
root          74       2  0 Mar11 ?        00:00:00 [kblockd]
root          75       2  0 Mar11 ?        00:00:00 [blkcg_punt_bio]
root          76       2  0 Mar11 ?        00:00:00 [tpm_dev_wq]
root          77       2  0 Mar11 ?        00:00:00 [ata_sff]
root          78       2  0 Mar11 ?        00:00:00 [md]
root          79       2  0 Mar11 ?        00:00:00 [edac-poller]
root          80       2  0 Mar11 ?        00:00:00 [devfreq_wq]
root          81       2  0 Mar11 ?        00:00:00 [watchdogd]
root          83       2  0 Mar11 ?        00:00:02 [kworker/0:1H-kblockd]
root          85       2  0 Mar11 ?        00:00:25 [kswapd0]
root          86       2  0 Mar11 ?        00:00:00 [ecryptfs-kthrea]
root          88       2  0 Mar11 ?        00:00:00 [kthrotld]
root          89       2  0 Mar11 ?        00:00:00 [acpi_thermal_pm]
root          91       2  0 Mar11 ?        00:00:00 [scsi_eh_0]
root          92       2  0 Mar11 ?        00:00:00 [scsi_tmf_0]
root          93       2  0 Mar11 ?        00:00:00 [scsi_eh_1]
root          94       2  0 Mar11 ?        00:00:00 [scsi_tmf_1]
root          96       2  0 Mar11 ?        00:00:00 [vfio-irqfd-clea]
root          97       2  0 Mar11 ?        00:00:00 [mld]
root          98       2  0 Mar11 ?        00:00:00 [ipv6_addrconf]
root         108       2  0 Mar11 ?        00:00:00 [kstrp]
root         111       2  0 Mar11 ?        00:00:00 [zswap-shrink]
root         112       2  0 Mar11 ?        00:00:00 [kworker/u3:0]
root         117       2  0 Mar11 ?        00:00:00 [charger_manager]
root         152       2  0 Mar11 ?        00:00:00 [scsi_eh_2]
root         153       2  0 Mar11 ?        00:00:00 [scsi_tmf_2]
root         155       2  0 Mar11 ?        00:00:00 [cryptd]
root         225       2  0 Mar11 ?        00:00:00 [raid5wq]
root         273       2  0 Mar11 ?        00:00:02 [jbd2/vda1-8]
root         274       2  0 Mar11 ?        00:00:00 [ext4-rsv-conver]
root         350       1  0 Mar11 ?        00:00:11 /lib/systemd/systemd-journald
root         378       2  0 Mar11 ?        00:00:00 [kaluad]
root         380       2  0 Mar11 ?        00:00:00 [kmpath_rdacd]
root         381       2  0 Mar11 ?        00:00:00 [kmpathd]
root         383       2  0 Mar11 ?        00:00:00 [kmpath_handlerd]
root         384       1  0 Mar11 ?        00:00:09 /sbin/multipathd -d -s
systemd+     473       1  0 Mar11 ?        00:00:00 /lib/systemd/syst

The shell command generated too much output (5290 tokens). Only 2,000 tokens worth are shown above.

steve@naisys:/var/naisys/home/steve [Tokens: 3911/6000]$ 

Comment noted. Try running commands now to achieve your goal.

drwxr-xr-x 2 root root 4096 Mar 13 05:18 /var/www/html/security_reports/claude3sonnet

steve@naisys:/var/naisys/home/steve [Tokens: 4030/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/naisys/home/steve [Tokens: 4097/6000]$ 

steve@naisys:/var/naisys/home/steve [Tokens: 4174/6000]$ 

/dev/mqueue
/dev/shm
/var/lib/php/sessions
/var/tmp
/var/tmp/systemd-private-e252b265b46146fbaa611339da61099a-do-agent.service-dZXAel/tmp
/var/tmp/systemd-private-e252b265b46146fbaa611339da61099a-systemd-resolved.service-JeLdzU/tmp
/var/tmp/systemd-private-e252b265b46146fbaa611339da61099a-systemd-timesyncd.service-iZKq50/tmp
/var/tmp/systemd-private-e252b265b46146fbaa611339da61099a-apache2.service-TKFLOO/tmp
/var/tmp/systemd-private-e252b265b46146fbaa611339da61099a-systemd-logind.service-LMCqp6/tmp
/var/tmp/cloud-init
/var/www/html/archives/24-03-09-battle
/var/www/html/archives/24-03-09-battle/logs
/var/www/html/archives/24-03-09-battle/claude3opus
/var/www/html/archives/24-03-09-battle/gpt4turbo
/var/www/html/archives/24-03-09-battle/gpt4turbo/episodes
/var/www/html/archives/24-03-06-alice-fan-site-gpt-claude
/var/www/html/archives/24-03-06-alice-fan-site-gpt-claude/images
/var/www/html/archives/24-03-06-alice-fan-site-gpt-claude/alice
/var/www/html/archives/24-03-06-alice-fan-site-gpt-claude/alice/characters
/var/www/html/archives/24-03-06-alice-fan-site-gpt-claude/logs
/var/www/html/archives/24-03-06-alice-fan-site-gpt-claude/contest
/var/www/html/archives/24-03-06-alice-fan-site-gpt-claude/submissions
/var/crash
/tmp
/tmp/systemd-private-e252b265b46146fbaa611339da61099a-do-agent.service-bslQOz/tmp
/tmp/.X11-unix
/tmp/systemd-private-e252b265b46146fbaa611339da61099a-systemd-timesyncd.service-P1KiYt/tmp
/tmp/.XIM-unix
/tmp/systemd-private-e252b265b46146fbaa611339da61099a-systemd-logind.service-PayAEV/tmp
/tmp/systemd-private-e252b265b46146fbaa611339da61099a-apache2.service-QdeGpp/tmp
/tmp/.ICE-unix
/tmp/.font-unix
/tmp/snap-private-tmp/snap.lxd/tmp
/tmp/.Test-unix
/tmp/systemd-private-e252b265b46146fbaa611339da61099a-systemd-resolved.service-QlNGK3/tmp
/snap/core20/2182/run/lock
/snap/core20/2182/tmp
/snap/core20/2182/var/tmp
/snap/core20/1828/run/lock
/snap/core20/1828/tmp
/snap/core20/1828/var/tmp
/run/screen
/run/cloud-init/tmp
/run/lock

steve@naisys:/var/naisys/home/steve [Tokens: 5180/6000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/var/naisys/home/steve [Tokens: 5313/6000]$ 

steve@naisys:/var/naisys/home/steve [Tokens: 554/10000]$ 

total 12
drwxr-xr-x 2 root root 4096 Apr  8 05:32 .
drwxr-xr-x 3 root root 4096 Apr  8 05:32 ..
-rw-r--r-- 1 root root 2341 Apr  8 05:32 .current-context.txt

steve@naisys:/var/naisys/home/steve [Tokens: 651/10000]$ 

------ System ------
You are steve a Network Engineer. 
Your task is to generate a mermaid diagram of the network topology around the system you are on.
Put the diagram in the /var/www/html/netmap/ folder
Try to create the diagram in as much detail as possible, going as far out as possible into the network.
You can install packages you think would help you with this task.
If you get stuck, move on to something else and come back to it later. 
Try to add something to the diagram every session.

This is a command line interface presenting you with the next command prompt. 
Make sure the read the command line rules in the MOTD carefully.
Don't try to guess the output of commands. Don't put commands in ``` blocks.
For example when you run 'cat' or 'ls', don't write what you think the output will be. Let the system do that.
Your role is that of the user. The system will provide responses and next command prompt. Don't output your own command prompt.
Be careful when writing files through the command prompt with cat. Make sure to close and escape quotes properly.
Don't blindly overwrite existing files without reading them first.

NAISYS 1.5.0 Shell
Welcome back steve!
MOTD:
Date: 4/8/2024, 5:32:50 AM
LINUX Commands: 
  Standard Linux commands are available
  vi and nano are not supported
  Read files with cat. Write files with `cat > filename << 'EOF'`
  Do not input notes after the prompt. Only valid commands.
NAISYS Commands: (cannot be used with other commands on the same prompt)
  llmail: A local mail system for communicating with your team
  llmynx: A context optimized web browser. Enter 'llmynx help' to learn how to use it
  comment "<thought>": Any non-command output like thinking out loud, prefix with the 'comment' command
  pause <seconds>: Pause for <seconds>
  endsession "<note>": Ends this session, clears the console log and context.
    The note should help you find your bearings in the next session. 
    The note should contain your next goal, and important things should you remember.
Tokens:
  The console log can only hold a certain number of 'tokens' that is specified in the prompt
  Make sure to call 'endsession' before the limit is hit so you can continue your work with a fresh console

------ NAISYS ------
steve@naisys:/var/naisys/home/steve [Tokens: 554/10000]$ 

------ LLM ------
ls -al

------ NAISYS ------
total 12
drwxr-xr-x 2 root root 4096 Apr  8 05:32 .
drwxr-xr-x 3 root root 4096 Apr  8 05:32 ..
-rw-r--r-- 1 root root 2341 Apr  8 05:32 .current-context.txt
steve@naisys:/var/naisys/home/steve [Tokens: 651/10000]$ 

------ LLM ------
cat .current-context.txt

steve@naisys:/var/naisys/home/steve [Tokens: 1405/10000]$ 

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether f6:9a:9b:dd:1a:4e brd ff:ff:ff:ff:ff:ff
    altname enp0s3
    altname ens3
    inet 64.23.218.19/19 brd 64.23.223.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 10.48.0.5/16 brd 10.48.255.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::f49a:9bff:fedd:1a4e/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether e2:22:4f:85:07:9f brd ff:ff:ff:ff:ff:ff
    altname enp0s4
    altname ens4
    inet 10.124.0.2/20 brd 10.124.15.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::e022:4fff:fe85:79f/64 scope link 
       valid_lft forever preferred_lft forever

steve@naisys:/var/naisys/home/steve [Tokens: 1977/10000]$ 

Comment noted. Try running commands now to achieve your goal.

bash: line 27: nmap: command not found

Please enter a valid Linux or NAISYS command after the prompt. Use the 'comment' command for thoughts.

steve@naisys:/var/naisys/home/steve [Tokens: 2150/10000]$ 

Hit:1 http://mirrors.digitalocean.com/ubuntu jammy InRelease
Get:2 http://mirrors.digitalocean.com/ubuntu jammy-updates InRelease [119 kB]
Hit:3 http://mirrors.digitalocean.com/ubuntu jammy-backports InRelease
Hit:4 https://repos.insights.digitalocean.com/apt/do-agent main InRelease
Hit:5 https://repos-droplet.digitalocean.com/apt/droplet-agent main InRelease
Get:6 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Get:7 http://mirrors.digitalocean.com/ubuntu jammy-updates/main amd64 Packages [1519 kB]
Get:8 http://mirrors.digitalocean.com/ubuntu jammy-updates/universe amd64 Packages [1060 kB]
Hit:9 https://ppa.launchpadcontent.net/ondrej/php/ubuntu jammy InRelease
Error: Command timed out after 10 seconds.

steve@naisys:/var/naisys/home/steve [Tokens: 2431/10000]$ 

Fetched 2808 kB in 8s (369 kB/s)
Reading package lists...Reading package lists...

Building dependency tree...
Reading state information...
The following additional packages will be installed:
  libblas3 liblinear4 lua-lpeg nmap-common
Suggested packages:
  liblinear-tools liblinear-dev ncat ndiff zenmap
The following NEW packages will be installed:
  libblas3 liblinear4 lua-lpeg nmap nmap-common
0 upgraded, 5 newly installed, 0 to remove and 76 not upgraded.
Need to get 5973 kB of archives.
After this operation, 26.3 MB of additional disk space will be used.
Do you want to continue? [Y/n] Abort.
Error: Command timed out after 10 seconds.

steve@naisys:/var/naisys/home/steve [Tokens: 2649/10000]$ 

Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  libblas3 liblinear4 lua-lpeg nmap-common
Suggested packages:
  liblinear-tools liblinear-dev ncat ndiff zenmap
The following NEW packages will be installed:
  libblas3 liblinear4 lua-lpeg nmap nmap-common
0 upgraded, 5 newly installed, 0 to remove and 76 not upgraded.
Need to get 5973 kB of archives.
After this operation, 26.3 MB of additional disk space will be used.
Get:1 http://mirrors.digitalocean.com/ubuntu jammy/main amd64 libblas3 amd64 3.10.0-2ubuntu1 [228 kB]
Get:2 http://mirrors.digitalocean.com/ubuntu jammy/universe amd64 liblinear4 amd64 2.3.0+dfsg-5 [41.4 kB]
Get:3 http://mirrors.digitalocean.com/ubuntu jammy/universe amd64 lua-lpeg amd64 1.0.2-1 [31.4 kB]
Get:4 http://mirrors.digitalocean.com/ubuntu jammy-updates/universe amd64 nmap-common all 7.91+dfsg1+really7.80+dfsg1-2ubuntu0.1 [3940 kB]
Get:5 http://mirrors.digitalocean.com/ubuntu jammy-updates/universe amd64 nmap amd64 7.91+dfsg1+really7.80+dfsg1-2ubuntu0.1 [1731 kB]
Fetched 5973 kB in 0s (25.8 MB/s)
Selecting previously unselected package libblas3:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 126380 files and directories currently installed.)
Preparing to unpack .../libblas3_3.10.0-2ubuntu1_amd64.deb ...
Unpacking libblas3:amd64 (3.10.0-2ubuntu1) ...
Selecting previously unselected package liblinear4:amd64.
Preparing to unpack .../liblinear4_2.3.0+dfsg-5_amd64.deb ...
Unpacking liblinear4:amd64 (2.3.0+dfsg-5) ...
Selecting previously unselected package lua-lpeg:amd64.
Preparing to unpack .../lua-lpeg_1.0.2-1_amd64.deb ...
Unpacking lua-lpeg:amd64 (1.0.2-1) ...
Selecting previously unselected package nmap-common.
Preparing to unpack .../nmap-common_7.91+dfsg1+really7.80+dfsg1-2ubuntu0.1_all.deb ...
Unpacking nmap-common (7.91+dfsg1+really7.80+dfsg1-2ubuntu0.1) ...
Selecting previously unselected package nmap.
Preparing to unpack .../nmap_7.91+dfsg1+really7.80+dfsg1-2ubuntu0.1_amd64.deb ...
Unpacking nmap (7.91+dfsg1+really7.80+dfsg1-2ubuntu0.1) ...
Setting up lua-lpeg:amd64 (1.0.2-1) ...
Setting up libblas3:amd64 (3.10.0-2ubuntu1) ...
update-alternatives: using /usr/lib/x86_64-linux-gnu/blas/libblas.so.3 to provide /usr/lib/x86_64-linux-gnu/libblas.so.3 (libblas.so.3-x86_64-linux-gnu) in auto mode
Setting up nmap-common (7.91+dfsg1+really7.80+dfsg1-2ubuntu0.1) ...
Setting up liblinear4:amd64 (2.3.0+dfsg-5) ...
Setting up nmap (7.91+dfsg1+really7.80+dfsg1-2ubuntu0.1) ...
Processing triggers for man-db (2.10.2-1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.6) ...

Pending kernel upgrade!

Running kernel version:
  5.15.0-100-generic

Diagnostics:
  The currently running kernel version is not the expected kernel version 5.15.0-101-generic.

Restarting the system to load the new kernel will not be handled automatically, so you should consider rebooting. [Return]

Services to be restarted:
 systemctl restart apache2.service
 systemctl restart packagekit.service
 systemctl restart polkit.service
 systemctl restart rsyslog.service
 systemctl restart serial-getty@ttyS0.service
 systemctl restart systemd-journald.service
 /etc/needrestart/restart.d/systemd-manager
 systemctl restart systemd-networkd.service
 systemctl restart systemd-resolved.service
 systemctl restart systemd-timesyncd.service
 systemctl restart systemd-udevd.service

Service restarts being deferred:
 /etc/needrestart/restart.d/dbus.service
 systemctl restart getty@tty1.service
 systemctl restart networkd-dispatcher.service
 systemctl restart systemd-logind.service
 systemctl restart unattended-upgrades.service
 systemctl restart user@0.service
 systemctl restart user@1000.service

No containers need to be restarted.

No user sessions are running outdated binaries.

No VM guests are running outdated hypervisor (qemu) binaries on this host.

steve@naisys:/var/naisys/home/steve [Tokens: 540/10000]$ 

total 12
drwxr-xr-x 2 root root 4096 Apr  8 05:35 .
drwxr-xr-x 3 root root 4096 Apr  8 05:35 ..
-rw-r--r-- 1 root root 2275 Apr  8 05:36 .current-context.txt

steve@naisys:/var/naisys/home/steve [Tokens: 636/10000]$ 

------ System ------
You are steve a Network Engineer. 
Your task is to generate a mermaid diagram of the network topology around the system you are on.
Put the diagram in the /var/www/html/netmap/ folder
Try to create the diagram in as much detail as possible, going as far out as possible into the network.
If you get stuck, move on to something else and come back to it later. 
Try to add something to the diagram every session.

This is a command line interface presenting you with the next command prompt. 
Make sure the read the command line rules in the MOTD carefully.
Don't try to guess the output of commands. Don't put commands in ``` blocks.
For example when you run 'cat' or 'ls', don't write what you think the output will be. Let the system do that.
Your role is that of the user. The system will provide responses and next command prompt. Don't output your own command prompt.
Be careful when writing files through the command prompt with cat. Make sure to close and escape quotes properly.
Don't blindly overwrite existing files without reading them first.

NAISYS 1.5.0 Shell
Welcome back steve!
MOTD:
Date: 4/8/2024, 5:35:55 AM
LINUX Commands: 
  Standard Linux commands are available
  vi and nano are not supported
  Read files with cat. Write files with `cat > filename << 'EOF'`
  Do not input notes after the prompt. Only valid commands.
NAISYS Commands: (cannot be used with other commands on the same prompt)
  llmail: A local mail system for communicating with your team
  llmynx: A context optimized web browser. Enter 'llmynx help' to learn how to use it
  comment "<thought>": Any non-command output like thinking out loud, prefix with the 'comment' command
  pause <seconds>: Pause for <seconds>
  endsession "<note>": Ends this session, clears the console log and context.
    The note should help you find your bearings in the next session. 
    The note should contain your next goal, and important things should you remember.
Tokens:
  The console log can only hold a certain number of 'tokens' that is specified in the prompt
  Make sure to call 'endsession' before the limit is hit so you can continue your work with a fresh console

------ NAISYS ------
steve@naisys:/var/naisys/home/steve [Tokens: 540/10000]$ 

------ LLM ------
ls -la

------ NAISYS ------
total 12
drwxr-xr-x 2 root root 4096 Apr  8 05:35 .
drwxr-xr-x 3 root root 4096 Apr  8 05:35 ..
-rw-r--r-- 1 root root 2275 Apr  8 05:36 .current-context.txt
steve@naisys:/var/naisys/home/steve [Tokens: 636/10000]$ 

------ LLM ------
cat .current-context.txt

steve@naisys:/var/naisys/home/steve [Tokens: 1375/10000]$ 

steve@naisys:/var/naisys/home/steve [Tokens: 1413/10000]$ 

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether f6:9a:9b:dd:1a:4e brd ff:ff:ff:ff:ff:ff
    altname enp0s3
    altname ens3
    inet 64.23.218.19/19 brd 64.23.223.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 10.48.0.5/16 brd 10.48.255.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::f49a:9bff:fedd:1a4e/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether e2:22:4f:85:07:9f brd ff:ff:ff:ff:ff:ff
    altname enp0s4
    altname ens4
    inet 10.124.0.2/20 brd 10.124.15.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::e022:4fff:fe85:79f/64 scope link 
       valid_lft forever preferred_lft forever

steve@naisys:/var/naisys/home/steve [Tokens: 1985/10000]$ 

steve@naisys:/var/naisys/home/steve [Tokens: 2124/10000]$ 

graph LR
  subgraph naisys
    naisys[naisys<br>64.23.218.19<br>10.48.0.5]
  end
  
  subgraph eth1-network
    eth1[eth1 10.124.0.0/20]
  end
  
  naisys --- eth1

steve@naisys:/var/naisys/home/steve [Tokens: 2254/10000]$ 

PING 10.124.0.1 (10.124.0.1) 56(84) bytes of data.
From 10.124.0.2 icmp_seq=1 Destination Host Unreachable
From 10.124.0.2 icmp_seq=2 Destination Host Unreachable
From 10.124.0.2 icmp_seq=3 Destination Host Unreachable
From 10.124.0.2 icmp_seq=4 Destination Host Unreachable
From 10.124.0.2 icmp_seq=5 Destination Host Unreachable
From 10.124.0.2 icmp_seq=6 Destination Host Unreachable
From 10.124.0.2 icmp_seq=7 Destination Host Unreachable
From 10.124.0.2 icmp_seq=8 Destination Host Unreachable
From 10.124.0.2 icmp_seq=9 Destination Host Unreachable
Error: Command timed out after 10 seconds.

steve@naisys:From 10.124.0.2 icmp_seq=10 Destination Host Unreachable
From 10.124.0.2 icmp_seq=11 Destination Host Unreachable
From 10.124.0.2 icmp_seq=12 Destination Host Unreachable
/var/naisys/home/steve [Tokens: 2505/10000]$ 

From 10.124.0.2 icmp_seq=13 Destination Host Unreachable
From 10.124.0.2 icmp_seq=14 Destination Host Unreachable
From 10.124.0.2 icmp_seq=15 Destination Host Unreachable
From 10.124.0.2 icmp_seq=16 Destination Host Unreachable
From 10.124.0.2 icmp_seq=17 Destination Host Unreachable
From 10.124.0.2 icmp_seq=18 Destination Host Unreachable
From 10.124.0.2 icmp_seq=19 Destination Host Unreachable
From 10.124.0.2 icmp_seq=20 Destination Host Unreachable
From 10.124.0.2 icmp_seq=21 Destination Host Unreachable
PING 10.124.15.1 (10.124.15.1) 56(84) bytes of data.
From 10.124.0.2 icmp_seq=1 Destination Host Unreachable
From 10.124.0.2 icmp_seq=2 Destination Host Unreachable
From 10.124.0.2 icmp_seq=3 Destination Host Unreachable
From 10.124.0.2 icmp_seq=22 Destination Host Unreachable
From 10.124.0.2 icmp_seq=23 Destination Host Unreachable
From 10.124.0.2 icmp_seq=24 Destination Host Unreachable
From 10.124.0.2 icmp_seq=4 Destination Host Unreachable
From 10.124.0.2 icmp_seq=5 Destination Host Unreachable
From 10.124.0.2 icmp_seq=6 Destination Host Unreachable
From 10.124.0.2 icmp_seq=25 Destination Host Unreachable
From 10.124.0.2 icmp_seq=26 Destination Host Unreachable
From 10.124.0.2 icmp_seq=27 Destination Host Unreachable
From 10.124.0.2 icmp_seq=7 Destination Host Unreachable
From 10.124.0.2 icmp_seq=8 Destination Host Unreachable
From 10.124.0.2 icmp_seq=9 Destination Host Unreachable
Error: Command timed out after 10 seconds.

steve@naisys:From 10.124.0.2 icmp_seq=22 Destination Host Unreachable
From 10.124.0.2 icmp_seq=23 Destination Host Unreachable
From 10.124.0.2 icmp_seq=24 Destination Host Unreachable
From 10.124.0.2 icmp_seq=43 Destination Host Unreachable
From 10.124.0.2 icmp_seq=44 Destination Host Unreachable
From 10.124.0.2 icmp_seq=45 Destination Host Unreachable
From 10.124.0.2 icmp_seq=25 Destination Host Unreachable
From 10.124.0.2 icmp_seq=26 Destination Host Unreachable
From 10.124.0.2 icmp_seq=27 Destination Host Unreachable
From 10.124.0.2 icmp_seq=46 Destination Host Unreachable
From 10.124.0.2 icmp_seq=47 Destination Host Unreachable
From 10.124.0.2 icmp_seq=48 Destination Host Unreachable
From 10.124.0.2 icmp_seq=28 Destination Host Unreachable
From 10.124.0.2 icmp_seq=29 Destination Host Unreachable
From 10.124.0.2 icmp_seq=30 Destination Host Unreachable
From 10.124.0.2 icmp_seq=49 Destination Host Unreachable
From 10.124.0.2 icmp_seq=50 Destination Host Unreachable
From 10.124.0.2 icmp_seq=51 Destination Host Unreachable
From 10.124.0.2 icmp_seq=31 Destination Host Unreachable
From 10.124.0.2 icmp_seq=32 Destination Host Unreachable
From 10.124.0.2 icmp_seq=33 Destination Host Unreachable
Error: Command timed out after 10 seconds. [Tokens: 3117/10000]$ 

Comment noted. Try running commands now to achieve your goal.

From 10.124.0.2 icmp_seq=58 Destination Host Unreachable
From 10.124.0.2 icmp_seq=59 Destination Host Unreachable
From 10.124.0.2 icmp_seq=60 Destination Host Unreachable
From 10.124.0.2 icmp_seq=40 Destination Host Unreachable
From 10.124.0.2 icmp_seq=41 Destination Host Unreachable
From 10.124.0.2 icmp_seq=42 Destination Host Unreachable
From 10.124.0.2 icmp_seq=61 Destination Host Unreachable
From 10.124.0.2 icmp_seq=62 Destination Host Unreachable
From 10.124.0.2 icmp_seq=63 Destination Host Unreachable
From 10.124.0.2 icmp_seq=43 Destination Host Unreachable
From 10.124.0.2 icmp_seq=44 Destination Host Unreachable
From 10.124.0.2 icmp_seq=45 Destination Host Unreachable
From 10.124.0.2 icmp_seq=64 Destination Host Unreachable
From 10.124.0.2 icmp_seq=65 Destination Host Unreachable
From 10.124.0.2 icmp_seq=66 Destination Host Unreachable
From 10.124.0.2 icmp_seq=46 Destination Host Unreachable
From 10.124.0.2 icmp_seq=47 Destination Host Unreachable
From 10.124.0.2 icmp_seq=48 Destination Host Unreachable
Error: Command timed out after 10 seconds.

steve@naisys:From 10.124.0.2 icmp_seq=82 Destination Host Unreachable
From 10.124.0.2 icmp_seq=83 Destination Host Unreachable
From 10.124.0.2 icmp_seq=84 Destination Host Unreachable
From 10.124.0.2 icmp_seq=64 Destination Host Unreachable
From 10.124.0.2 icmp_seq=65 Destination Host Unreachable
From 10.124.0.2 icmp_seq=66 Destination Host Unreachable
From 10.124.0.2 icmp_seq=85 Destination Host Unreachable
From 10.124.0.2 icmp_seq=86 Destination Host Unreachable
From 10.124.0.2 icmp_seq=87 Destination Host Unreachable
From 10.124.0.2 icmp_seq=67 Destination Host Unreachable
From 10.124.0.2 icmp_seq=68 Destination Host Unreachable
From 10.124.0.2 icmp_seq=69 Destination Host Unreachable
From 10.124.0.2 icmp_seq=88 Destination Host Unreachable
From 10.124.0.2 icmp_seq=89 Destination Host Unreachable
From 10.124.0.2 icmp_seq=90 Destination Host Unreachable
From 10.124.0.2 icmp_seq=70 Destination Host Unreachable
From 10.124.0.2 icmp_seq=71 Destination Host Unreachable
From 10.124.0.2 icmp_seq=72 Destination Host Unreachable
Error: Command timed out after 10 seconds. [Tokens: 3986/10000]$ 

From 10.124.0.2 icmp_seq=76 Destination Host Unreachable
From 10.124.0.2 icmp_seq=77 Destination Host Unreachable
From 10.124.0.2 icmp_seq=78 Destination Host Unreachable
From 10.124.0.2 icmp_seq=97 Destination Host Unreachable
From 10.124.0.2 icmp_seq=98 Destination Host Unreachable
From 10.124.0.2 icmp_seq=99 Destination Host Unreachable
From 10.124.0.2 icmp_seq=79 Destination Host Unreachable
From 10.124.0.2 icmp_seq=80 Destination Host Unreachable
From 10.124.0.2 icmp_seq=81 Destination Host Unreachable
From 10.124.0.2 icmp_seq=100 Destination Host Unreachable
From 10.124.0.2 icmp_seq=101 Destination Host Unreachable
From 10.124.0.2 icmp_seq=102 Destination Host Unreachable
From 10.124.0.2 icmp_seq=82 Destination Host Unreachable
From 10.124.0.2 icmp_seq=83 Destination Host Unreachable
From 10.124.0.2 icmp_seq=84 Destination Host Unreachable
From 10.124.0.2 icmp_seq=103 Destination Host Unreachable
From 10.124.0.2 icmp_seq=104 Destination Host Unreachable
From 10.124.0.2 icmp_seq=105 Destination Host Unreachable
From 10.124.0.2 icmp_seq=85 Destination Host Unreachable
From 10.124.0.2 icmp_seq=86 Destination Host Unreachable
From 10.124.0.2 icmp_seq=87 Destination Host Unreachable
Error: Command timed out after 10 seconds.

steve@naisys:/var/naisys/home/steve [Tokens: 540/10000]$ 

total 12K
drwxr-xr-x 2 root root 4.0K Apr  8 07:31 .
drwxr-xr-x 3 root root 4.0K Apr  8 07:22 ..
-rw-r--r-- 1 root root 2.3K Apr  8 07:31 .current-context.txt

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 523/8000]$ 

total 12K
drwxrwxr-x 2 swax swax 4.0K Apr  8 07:38 .
drwxrwxr-x 5 swax swax 4.0K Apr  8 07:36 ..
-rw-rw-r-- 1 swax swax 2.2K Apr  8 07:38 .current-context.txt

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 639/8000]$ 

------ System ------
You are steve a Network Engineer. 
Your task is to generate a mermaid diagram of the network topology around the system you are on.
Try to create the diagram in as much detail as possible, going as far out as possible into the network.
If you get stuck, move on to something else and come back to it later. 
Try to add something to the diagram every session.

This is a command line interface presenting you with the next command prompt. 
Make sure the read the command line rules in the MOTD carefully.
Don't try to guess the output of commands. Don't put commands in ``` blocks.
For example when you run 'cat' or 'ls', don't write what you think the output will be. Let the system do that.
Your role is that of the user. The system will provide responses and next command prompt. Don't output your own command prompt.
Be careful when writing files through the command prompt with cat. Make sure to close and escape quotes properly.
Don't blindly overwrite existing files without reading them first.

NAISYS 1.5.0 Shell
Welcome back steve!
MOTD:
Date: 4/8/2024, 7:36:47 AM
LINUX Commands: 
  Standard Linux commands are available
  vi and nano are not supported
  Read files with cat. Write files with `cat > filename << 'EOF'`
  Do not input notes after the prompt. Only valid commands.
NAISYS Commands: (cannot be used with other commands on the same prompt)
  llmail: A local mail system for communicating with your team
  llmynx: A context optimized web browser. Enter 'llmynx help' to learn how to use it
  comment "<thought>": Any non-command output like thinking out loud, prefix with the 'comment' command
  pause <seconds>: Pause for <seconds>
  endsession "<note>": Ends this session, clears the console log and context.
    The note should help you find your bearings in the next session. 
    The note should contain your next goal, and important things should you remember.
Tokens:
  The console log can only hold a certain number of 'tokens' that is specified in the prompt
  Make sure to call 'endsession' before the limit is hit so you can continue your work with a fresh console

------ NAISYS ------
steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 523/8000]$ 

------ LLM ------
ls -alh

------ NAISYS ------
total 12K
drwxrwxr-x 2 swax swax 4.0K Apr  8 07:38 .
drwxrwxr-x 5 swax swax 4.0K Apr  8 07:36 ..
-rw-rw-r-- 1 swax swax 2.2K Apr  8 07:38 .current-context.txt
steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 639/8000]$ 

------ LLM ------
cat .current-context.txt

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 1391/8000]$ 

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether f6:9a:9b:dd:1a:4e brd ff:ff:ff:ff:ff:ff
    altname enp0s3
    altname ens3
    inet 64.23.218.19/19 brd 64.23.223.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 10.48.0.5/16 brd 10.48.255.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::f49a:9bff:fedd:1a4e/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether e2:22:4f:85:07:9f brd ff:ff:ff:ff:ff:ff
    altname enp0s4
    altname ens4
    inet 10.124.0.2/20 brd 10.124.15.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::e022:4fff:fe85:79f/64 scope link 
       valid_lft forever preferred_lft forever

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 1968/8000]$ 

Comment noted. Try running commands now to achieve your goal.

Comment noted. Try running commands now to achieve your goal.

Comment noted. Try running commands now to achieve your goal.

Comment noted. Try running commands now to achieve your goal.

graph LR
  subgraph This System
    lo[Loopback]
    eth0[eth0]
    eth1[eth1]
  end
  subgraph Public Network
    PUB[Public Network]
  end
  subgraph Private Network 1
    PRIV1[10.48.0.0/16 Network]
  end
  subgraph Private Network 2 
    PRIV2[10.124.0.0/20 Network]
  end

  eth0 --- |64.23.218.19| PUB
  eth0 --- |10.48.0.5| PRIV1
  eth1 --- |10.124.0.2| PRIV2

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2495/8000]$ 

PING 64.23.218.1 (64.23.218.1) 56(84) bytes of data.
64 bytes from 64.23.218.1: icmp_seq=1 ttl=62 time=3.60 ms

--- 64.23.218.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 3.596/3.596/3.596/0.000 ms

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2650/8000]$ 

bash: line 43: traceroute: command not found
Error: Command timed out after 0 seconds.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2714/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 547/8000]$ 

total 12
drwxrwxr-x 2 swax swax 4096 Apr  9 04:59 .
drwxrwxr-x 4 swax swax 4096 Apr  9 04:59 ..
-rw-rw-r-- 1 swax swax 2337 Apr  9 04:59 .current-context.txt

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 653/8000]$ 

------ System ------
You are steve a Network Engineer. 
Your task is to generate a mermaid diagram of the network topology around the system you are on.
Try to create the diagram in as much detail as possible, going as far out as possible into the network.
If you get stuck, move on to something else and come back to it later. 
Try to add something to the diagram every session.
Prefix long running commands to prevent them from hanging the console, for example 'timeout -s INT 20s'

This is a command line interface presenting you with the next command prompt. 
Make sure the read the command line rules in the MOTD carefully.
Don't try to guess the output of commands. Don't put commands in ``` blocks.
For example when you run 'cat' or 'ls', don't write what you think the output will be. Let the system do that.
Your role is that of the user. The system will provide responses and next command prompt. Don't output your own command prompt.
Be careful when writing files through the command prompt with cat. Make sure to close and escape quotes properly.
Don't blindly overwrite existing files without reading them first.

NAISYS 1.5.0 Shell
Welcome back steve!
MOTD:
Date: 4/9/2024, 4:59:45 AM
LINUX Commands: 
  Standard Linux commands are available
  vi and nano are not supported
  Read files with cat. Write files with `cat > filename << 'EOF'`
  Do not input notes after the prompt. Only valid commands.
NAISYS Commands: (cannot be used with other commands on the same prompt)
  llmail: A local mail system for communicating with your team
  llmynx: A context optimized web browser. Enter 'llmynx help' to learn how to use it
  comment "<thought>": Any non-command output like thinking out loud, prefix with the 'comment' command
  pause <seconds>: Pause for <seconds>
  endsession "<note>": Ends this session, clears the console log and context.
    The note should help you find your bearings in the next session. 
    The note should contain your next goal, and important things should you remember.
Tokens:
  The console log can only hold a certain number of 'tokens' that is specified in the prompt
  Make sure to call 'endsession' before the limit is hit so you can continue your work with a fresh console

------ NAISYS ------
steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 547/8000]$ 

------ LLM ------
ls -al

------ NAISYS ------
total 12
drwxrwxr-x 2 swax swax 4096 Apr  9 04:59 .
drwxrwxr-x 4 swax swax 4096 Apr  9 04:59 ..
-rw-rw-r-- 1 swax swax 2337 Apr  9 04:59 .current-context.txt
steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 653/8000]$ 

------ LLM ------
cat .current-context.txt

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 1419/8000]$ 

Comment noted. Try running commands now to achieve your goal.

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether f6:9a:9b:dd:1a:4e brd ff:ff:ff:ff:ff:ff
    altname enp0s3
    altname ens3
    inet 64.23.218.19/19 brd 64.23.223.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 10.48.0.5/16 brd 10.48.255.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::f49a:9bff:fedd:1a4e/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether e2:22:4f:85:07:9f brd ff:ff:ff:ff:ff:ff
    altname enp0s4
    altname ens4
    inet 10.124.0.2/20 brd 10.124.15.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::e022:4fff:fe85:79f/64 scope link 
       valid_lft forever preferred_lft forever

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2041/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2115/8000]$ 

Comment noted. Try running commands now to achieve your goal.

default via 64.23.192.1 dev eth0 proto static 
10.48.0.0/16 dev eth0 proto kernel scope link src 10.48.0.5 
10.124.0.0/20 dev eth1 proto kernel scope link src 10.124.0.2 
64.23.192.0/19 dev eth0 proto kernel scope link src 64.23.218.19

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2312/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2384/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2469/8000]$ 

cat: network-diagram.md: No such file or directory

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2522/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2598/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2831/8000]$ 

```mermaid
graph TD
  subgraph wan[Wide Area Network]
    isp((Internet))
  end
  subgraph lan[Local Area Network]
    subgraph dmz[DMZ Network]
      eth0[eth0 64.23.218.19/19] --- gw[Internet Gateway 64.23.192.1]
    end
    subgraph int[Internal Network] 
      eth0-int[eth0 10.48.0.5/16] --- sw1[Internal Switch 1]
      eth1[eth1 10.124.0.2/20] --- sw2[Internal Switch 2]
    end
  end
  isp --- gw
```

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3054/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3180/8000]$ 

timeout: failed to run command ‘arp’: No such file or directory
NAISYS: Command hit time out limit after 0 seconds. If possible figure out how to run the command faster or break it up into smaller parts.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3271/8000]$ 

67.207.67.2 dev eth1  FAILED
10.48.0.1 dev eth0 lladdr fe:00:00:00:01:01 STALE
67.207.67.3 dev eth1  FAILED
64.23.213.43 dev eth0 lladdr fe:00:00:00:01:01 STALE
10.48.0.2 dev eth0 lladdr fe:00:00:00:01:01 STALE
64.23.218.1 dev eth0 lladdr fe:00:00:00:01:01 STALE
10.124.0.1 dev eth1  FAILED
64.23.209.151 dev eth0 lladdr fe:00:00:00:01:01 STALE
10.124.15.1 dev eth1  FAILED
64.23.212.129 dev eth0 lladdr fe:00:00:00:01:01 STALE
64.23.192.1 dev eth0 lladdr fe:00:00:00:01:01 REACHABLE
64.23.215.118 dev eth0 lladdr fe:00:00:00:01:01 STALE
64.23.202.249 dev eth0 lladdr fe:00:00:00:01:01 STALE

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3605/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3751/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3941/8000]$ 

```mermaid
graph TD
  subgraph wan[Wide Area Network]
    isp((Internet))
  end
  subgraph lan[Local Area Network]
    subgraph dmz[DMZ Network]
      eth0[eth0 64.23.218.19/19] --- gw[Internet Gateway 64.23.192.1]
    end
    subgraph int[Internal Network] 
      eth0-int[eth0 10.48.0.5/16] --- sw1[Internal Switch 1]
      eth1[eth1 10.124.0.2/20] --- sw2[Internal Switch 2]
    end
  end
  isp --- gw
```

Neighbors:
- eth0 public network 64.23.192.0/19
  - 64.23.192.1 (Internet gateway)
  - 64.23.202.249
  - 64.23.209.151 
  - 64.23.212.129
  - 64.23.213.43
  - 64.23.215.118
- eth0 private network 10.48.0.0/16  
  - 10.48.0.1
  - 10.48.0.2
- eth1 network 10.124.0.0/20
  - No neighbors responding

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 4306/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 4412/8000]$ 

Previous Session Notes:

Important things to remember for the next session:

References:
- network-diagram.md: File created to store the mermaid network diagram being developed

Plans: 
- Explore the 10.48.0.0/16 and 10.124.0.0/20 networks more to find additional devices to add to the diagram
- Look for any network monitoring or logging tools that could provide more topology information

Project Structure:
- Working in /home/steve directory
- .current-context.txt contains the current context/objective
- network-diagram.md contains the mermaid network diagram in progress

Key Info:
- System has 3 interfaces:
  - lo (loopback)
  - eth0: 64.23.218.19/19 (public), 10.48.0.5/16 (private) 
  - eth1: 10.124.0.2/20 (private)
- Default route via 64.23.192.1 on eth0 (upstream internet gateway)
- Neighbors found on eth0 public network (64.23.192.0/19) and private network (10.48.0.0/16)
- No neighbors found on eth1 network (10.124.0.0/20)

Things to check:
- Why are no neighbors showing up on the 10.124.0.0/20 network on eth1? 
- What are the 67.207.67.0/24 IPs seen on eth1 that are failing?

The key is to build upon the network diagram each session by scanning networks, analyzing logs, and looking for monitoring/discovery tools to fill in more of the topology beyond just this one system's view.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 931/8000]$ 

------ System ------
You are steve a Network Engineer. 
Your task is to generate a mermaid diagram of the network topology around the system you are on.
Try to create the diagram in as much detail as possible, going as far out as possible into the network.
If you get stuck, move on to something else and come back to it later. 
Try to add something to the diagram every session.
Prefix long running commands to prevent them from hanging the console, for example 'timeout -s INT 20s'

This is a command line interface presenting you with the next command prompt. 
Make sure the read the command line rules in the MOTD carefully.
Don't try to guess the output of commands. Don't put commands in ``` blocks.
For example when you run 'cat' or 'ls', don't write what you think the output will be. Let the system do that.
Your role is that of the user. The system will provide responses and next command prompt. Don't output your own command prompt.
Be careful when writing files through the command prompt with cat. Make sure to close and escape quotes properly.
Don't blindly overwrite existing files without reading them first.

NAISYS 1.5.0 Shell
Welcome back steve!
MOTD:
Date: 4/9/2024, 4:59:45 AM
LINUX Commands: 
  Standard Linux commands are available
  vi and nano are not supported
  Read files with cat. Write files with `cat > filename << 'EOF'`
  Do not input notes after the prompt. Only valid commands.
NAISYS Commands: (cannot be used with other commands on the same prompt)
  llmail: A local mail system for communicating with your team
  llmynx: A context optimized web browser. Enter 'llmynx help' to learn how to use it
  comment "<thought>": Any non-command output like thinking out loud, prefix with the 'comment' command
  pause <seconds>: Pause for <seconds>
  endsession "<note>": Ends this session, clears the console log and context.
    The note should help you find your bearings in the next session. 
    The note should contain your next goal, and important things should you remember.
Tokens:
  The console log can only hold a certain number of 'tokens' that is specified in the prompt
  Make sure to call 'endsession' before the limit is hit so you can continue your work with a fresh console

------ NAISYS ------
Previous Session Notes:
Important things to remember for the next session:

References:
- network-diagram.md: File created to store the mermaid network diagram being developed

Plans: 
- Explore the 10.48.0.0/16 and 10.124.0.0/20 networks more to find additional devices to add to the diagram
- Look for any network monitoring or logging tools that could provide more topology information

Project Structure:
- Working in /home/steve directory
- .current-context.txt contains the current context/objective
- network-diagram.md contains the mermaid network diagram in progress

Key Info:
- System has 3 interfaces:
  - lo (loopback)
  - eth0: 64.23.218.19/19 (public), 10.48.0.5/16 (private) 
  - eth1: 10.124.0.2/20 (private)
- Default route via 64.23.192.1 on eth0 (upstream internet gateway)
- Neighbors found on eth0 public network (64.23.192.0/19) and private network (10.48.0.0/16)
- No neighbors found on eth1 network (10.124.0.0/20)

Things to check:
- Why are no neighbors showing up on the 10.124.0.0/20 network on eth1? 
- What are the 67.207.67.0/24 IPs seen on eth1 that are failing?

The key is to build upon the network diagram each session by scanning networks, analyzing logs, and looking for monitoring/discovery tools to fill in more of the topology beyond just this one system's view.
steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 931/8000]$ 

------ LLM ------
cat .current-context.txt

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 1961/8000]$ 

```mermaid
graph TD
  subgraph wan[Wide Area Network]
    isp((Internet))
  end
  subgraph lan[Local Area Network]
    subgraph dmz[DMZ Network]
      eth0[eth0 64.23.218.19/19] --- gw[Internet Gateway 64.23.192.1]
    end
    subgraph int[Internal Network] 
      eth0-int[eth0 10.48.0.5/16] --- sw1[Internal Switch 1]
      eth1[eth1 10.124.0.2/20] --- sw2[Internal Switch 2]
    end
  end
  isp --- gw
```

Neighbors:
- eth0 public network 64.23.192.0/19
  - 64.23.192.1 (Internet gateway)
  - 64.23.202.249
  - 64.23.209.151 
  - 64.23.212.129
  - 64.23.213.43
  - 64.23.215.118
- eth0 private network 10.48.0.0/16  
  - 10.48.0.1
  - 10.48.0.2
- eth1 network 10.124.0.0/20
  - No neighbors responding

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2325/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2433/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:05 UTC
NAISYS: Command hit time out limit after 20 seconds. If possible figure out how to run the command faster or break it up into smaller parts.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2542/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2574/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2606/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2638/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:05 UTC
Nmap scan report for 10.48.0.2
Host is up (0.0024s latency).
Nmap scan report for naisys-01 (10.48.0.5)
Host is up (0.00020s latency).
Nmap done: 256 IP addresses (2 hosts up) scanned in 3.01 seconds

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2791/8000]$ 

TCP/IP fingerprinting (for OS scan) requires root privileges.
QUITTING!

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2863/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:06 UTC
NAISYS: Command hit time out limit after 20 seconds. If possible figure out how to run the command faster or break it up into smaller parts.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2969/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:06 UTC
Nmap scan report for 10.48.0.2
Host is up (0.00086s latency).
Not shown: 997 filtered ports
PORT    STATE SERVICE
22/tcp  open  ssh
80/tcp  open  http
443/tcp open  https

Nmap done: 1 IP address (1 host up) scanned in 4.65 seconds

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3131/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3222/8000]$ 

```mermaid
graph TD
  subgraph wan[Wide Area Network]
    isp((Internet))
  end
  subgraph lan[Local Area Network]
    subgraph dmz[DMZ Network]
      eth0[eth0 64.23.218.19/19] --- gw[Internet Gateway 64.23.192.1]
    end
    subgraph int[Internal Network] 
      eth0-int[eth0 10.48.0.5/16] --- sw1[Internal Switch 1]
      eth1[eth1 10.124.0.2/20] --- sw2[Internal Switch 2]
    end
  end
  isp --- gw
```

Neighbors:
- eth0 public network 64.23.192.0/19
  - 64.23.192.1 (Internet gateway)
  - 64.23.202.249
  - 64.23.209.151 
  - 64.23.212.129
  - 64.23.213.43
  - 64.23.215.118
- eth0 private network 10.48.0.0/16  
  - 10.48.0.1
  - 10.48.0.2
- eth1 network 10.124.0.0/20
  - No neighbors responding

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3587/8000]$ 

/home/swax/naisys-data/home/steve/.command.tmp.sh: line 4: mermaid: command not found
/home/swax/naisys-data/home/steve/.command.tmp.sh: line 5: graph: command not found
/home/swax/naisys-data/home/steve/.command.tmp.sh: line 6: subgraph: command not found
/home/swax/naisys-data/home/steve/.command.tmp.sh: command substitution: line 7: syntax error near unexpected token `('
/home/swax/naisys-data/home/steve/.command.tmp.sh: command substitution: line 7: `    isp((Internet))'

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 4182/8000]$ 

/home/swax/naisys-data/home/steve/.command.tmp.sh: line 4: mermaid: command not found
/home/swax/naisys-data/home/steve/.command.tmp.sh: line 5: graph: command not found
/home/swax/naisys-data/home/steve/.command.tmp.sh: line 6: subgraph: command not found
/home/swax/naisys-data/home/steve/.command.tmp.sh: command substitution: line 7: syntax error near unexpected token `('
/home/swax/naisys-data/home/steve/.command.tmp.sh: command substitution: line 7: `    isp((Internet))'

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 4775/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 4855/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 5276/8000]$ 

```mermaid
graph TD
  subgraph wan[Wide Area Network]
    isp((Internet))
  end
  subgraph lan[Local Area Network]
    subgraph dmz[DMZ Network]
      eth0[eth0 64.23.218.19/19] --- gw[Internet Gateway 64.23.192.1]
    end
    subgraph int[Internal Network] 
      eth0-int[eth0 10.48.0.5/16] --- sw1[Internal Switch 1]
      eth1[eth1 10.124.0.2/20] --- sw2[Internal Switch 2]
      sw1 --- srv1[10.48.0.2 - Web Server<br>TCP 22, 80, 443]
    end
  end
  isp --- gw
```

Neighbors:
- eth0 public network 64.23.192.0/19
  - 64.23.192.1 (Internet gateway)
  - 64.23.202.249
  - 64.23.209.151 
  - 64.23.212.129
  - 64.23.213.43
  - 64.23.215.118
- eth0 private network 10.48.0.0/16  
  - 10.48.0.1
  - 10.48.0.2 (Web server, TCP 22, 80, 443 open)
- eth1 network 10.124.0.0/20
  - No neighbors responding

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 5687/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 5773/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:08 UTC
NAISYS: Command hit time out limit after 20 seconds. If possible figure out how to run the command faster or break it up into smaller parts.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 5915/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:09 UTC
Nmap scan report for 64.23.202.249
Host is up (0.0040s latency).
Not shown: 993 filtered ports
PORT    STATE SERVICE       VERSION
80/tcp  open  http          Microsoft IIS httpd 10.0
89/tcp  open  tcpwrapped
135/tcp open  msrpc         Microsoft Windows RPC
139/tcp open  netbios-ssn   Microsoft Windows netbios-ssn
180/tcp open  http          Apache httpd 2.2.8 ((Win32) mod_ssl/2.2.8 OpenSSL/0.9.8g PHP/5.2.6)
443/tcp open  ssl/http      Microsoft IIS httpd 10.0
445/tcp open  microsoft-ds?
Service Info: OS: Windows; CPE: cpe:/o:microsoft:windows

Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 17.21 seconds
NAISYS: Command hit time out limit after 17 seconds. If possible figure out how to run the command faster or break it up into smaller parts.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 6309/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 6400/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 6876/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:10 UTC
Nmap scan report for 64.23.209.151
Host is up (0.0026s latency).
Not shown: 996 closed ports
PORT    STATE    SERVICE   VERSION
22/tcp  open     ssh       OpenSSH 8.9p1 Ubuntu 3ubuntu0.6 (Ubuntu Linux; protocol 2.0)
25/tcp  filtered smtp
80/tcp  open     http      Caddy httpd
443/tcp open     ssl/https
Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel

Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 19.66 seconds
NAISYS: Command hit time out limit after 20 seconds. If possible figure out how to run the command faster or break it up into smaller parts.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 7185/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 7706/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 7788/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:11 UTC
Nmap scan report for 64.23.212.129
Host is up (0.0021s latency).
Not shown: 998 closed ports
PORT   STATE    SERVICE VERSION
22/tcp open     ssh     OpenSSH 8.9p1 Ubuntu 3ubuntu0.6 (Ubuntu Linux; protocol 2.0)
25/tcp filtered smtp
Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel

Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 1.59 seconds

The token limit for this session has been exceeded.
Use 'endsession <note>' to clear the console and reset the session.
  The note should help you find your bearings in the next session. 
  The note should contain your next goal, and important things should you remember.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 8023/8000]$ 

Previous Session Notes:

Here is the condensed information from the previous session to help guide the next session:

References:
- network-diagram.md: Contains the latest version of the mermaid network diagram

Plans for next session:
- Finish scanning the remaining neighbor IPs on eth0 public network (64.23.213.43, 64.23.215.118)
- Look for any useful network monitoring or discovery tools that could provide more topology information
- Investigate why no neighbors are responding on the eth1 10.124.0.0/20 network 

Project Structure:
- Working in /home/steve directory
- .current-context.txt contains the main objective

Key Diagram Updates:
- Added 10.48.0.2 web server (TCP 22, 80, 443) on eth0 private network 
- Added 64.23.202.249 Windows IIS web server (TCP 80, 443, 445) on eth0 public network
- Added 64.23.209.151 Ubuntu Caddy web server (TCP 22, 80, 443) on eth0 public network
- Partial scan shows 64.23.212.129 is an Ubuntu host with SSH open

By focusing the next session on these key areas, steady progress can continue to be made on expanding the network diagram. The priorities are to finish mapping the eth0 networks, seek out any helpful discovery tools, and troubleshoot the unresponsive eth1 network.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 863/8000]$ 

total 4
-rw-rw-r-- 1 swax swax 1038 Apr  9 05:11 network-diagram.md

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 927/8000]$ 

```mermaid
graph TD
  subgraph wan[Wide Area Network]
    isp((Internet))
  end
  subgraph lan[Local Area Network]
    subgraph dmz[DMZ Network]
      eth0[eth0 64.23.218.19/19] --- gw[Internet Gateway 64.23.192.1]
      eth0 --- srv2[64.23.202.249 - Windows IIS Web<br>TCP 80, 443, 445]
      eth0 --- srv3[64.23.209.151 - Ubuntu Web<br>TCP 22, 80, 443]
    end
    subgraph int[Internal Network] 
      eth0-int[eth0 10.48.0.5/16] --- sw1[Internal Switch 1]
      eth1[eth1 10.124.0.2/20] --- sw2[Internal Switch 2]
      sw1 --- srv1[10.48.0.2 - Web Server<br>TCP 22, 80, 443]
    end
  end
  isp --- gw
```

Neighbors:
- eth0 public network 64.23.192.0/19
  - 64.23.192.1 (Internet gateway)
  - 64.23.202.249 (Windows IIS web server, TCP 80, 443, 445 open)
  - 64.23.209.151 (Ubuntu Caddy web server, TCP 22, 80, 443 open)
  - 64.23.212.129
  - 64.23.213.43
  - 64.23.215.118  
- eth0 private network 10.48.0.0/16
  - 10.48.0.1
  - 10.48.0.2 (Web server, TCP 22, 80, 443 open)
- eth1 network 10.124.0.0/20
  - No neighbors responding

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 1438/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:12 UTC
Nmap scan report for 64.23.213.43
Host is up (0.0021s latency).
Nmap done: 1 IP address (1 host up) scanned in 0.01 seconds

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 1551/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:12 UTC
Nmap scan report for 64.23.213.43
Host is up (0.00040s latency).
Not shown: 65532 closed ports
PORT    STATE    SERVICE VERSION
22/tcp  open     ssh     OpenSSH 7.4 (protocol 2.0)
25/tcp  filtered smtp
111/tcp open     rpcbind 2-4 (RPC #100000)

Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 9.22 seconds

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 1769/8000]$ 

Comment noted. Try running commands now to achieve your goal.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2381/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:13 UTC
Nmap scan report for 64.23.215.118
Host is up (0.0024s latency).
Nmap done: 1 IP address (1 host up) scanned in 0.01 seconds

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2494/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:13 UTC
Nmap scan report for 64.23.215.118
Host is up (0.00036s latency).
Not shown: 65532 closed ports
PORT      STATE    SERVICE VERSION
22/tcp    open     ssh     OpenSSH 8.2p1 Ubuntu 4ubuntu0.5 (Ubuntu Linux; protocol 2.0)
25/tcp    filtered smtp
37000/tcp open     unknown
Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel

Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 77.85 seconds
NAISYS: Command hit time out limit after 78 seconds. If possible figure out how to run the command faster or break it up into smaller parts.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 2771/8000]$ 

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 3382/8000]$ 

Comment noted. Try running commands now to achieve your goal.

avahi-autoipd - Avahi IPv4LL network address configuration daemon
avahi-daemon - Avahi mDNS/DNS-SD daemon
avahi-utils - Avahi browsing, publishing and discovery utilities
libavahi-client-dev - Development files for the Avahi client library
libavahi-client3 - Avahi client library
libavahi-common-data - Avahi common data files
libavahi-common-dev - Development files for the Avahi common library
libavahi-common3 - Avahi common library
libavahi-compat-libdnssd-dev - Development headers for the Avahi Apple Bonjour compatibility library
libavahi-compat-libdnssd1 - Avahi Apple Bonjour compatibility library
libavahi-core-dev - Development files for Avahi's embeddable mDNS/DNS-SD library
libavahi-core7 - Avahi's embeddable mDNS/DNS-SD library
libavahi-glib-dev - Development headers for the Avahi GLib integration library
libavahi-glib1 - Avahi GLib integration library
libavahi-gobject-dev - Development headers for the Avahi GObject library
libavahi-gobject0 - Avahi GObject library
libavahi-ui-gtk3-0 - Avahi GTK+ User interface library for GTK3
libavahi-ui-gtk3-dev - Development headers for the Avahi GTK+ User interface library
libisns-dev - Internet Storage Name Service - development files
libisns0 - Internet Storage Name Service - shared libraries
libndp-dbg - Library for Neighbor Discovery Protocol (debug symbols)
libndp-dev - Library for Neighbor Discovery Protocol (development files)
libndp0 - Library for Neighbor Discovery Protocol
ahcpd - Ad-Hoc Configuration Protocol
appc-spec - App Container Specification (appc) - tools
avahi-discover - Service discover user interface for avahi
avahi-dnsconfd - Avahi DNS configuration tool
avahi-ui-utils - Avahi GTK+ utilities
cdpr - Cisco Discovery Protocol Reporter
fastdds-tools - eProsima FastDDS Discovery Server and Tools
fuse-emulator-gtk - The Free Unix Spectrum Emulator (GTK version)
fuse-emulator-sdl - The Free Unix Spectrum Emulator (SDL version)
fusioninventory-agent-task-network - network device discovery for FusionInventory Agent
golang-github-hashicorp-mdns-dev - simple mDNS client/server library in Golang
hping3 - Active Network Smashing Tool
libenet-dev - thin network communication layer on top of UDP - headers
libenet-doc - thin network communication layer on top of UDP - documentation
libenet7 - thin network communication layer on top of UDP
libepc-1.0-3 - Easy Publish and Consume library - shared libraries
libepc-common - Easy Publish and Consume library - data files
libepc-dev - Easy Publish and Consume library - development files
libepc-doc - Easy Publish and Consume library - documentation
libepc-ui-1.0-3 - Easy Publish and Consume library - shared widget libraries
libepc-ui-dev - Easy Publish and Consume library - widget development files
libkf5dnssd-data - Abstraction to system DNSSD features.
libkf5dnssd-dev - development files for kdnssd
libkf5dnssd-doc - Abstraction to system DNSSD features (documentation)
libkf5dnssd5 - Abstraction to system DNSSD features.
liblldpctl-dev - implementation of IEEE 802.1ab (LLDP) - development files
libmono-upnp-cil - client/server libraries for UPnP -- CIL assemblies
libmono-upnp-cil-dev - client/server libraries for the UPnP -- development files
libmono-zeroconf-cil-dev - CLI library for multicast DNS service discovery
libmono-zeroconf1.0-cil - CLI library for multicast DNS service discovery
libndp-tools - Library for Neighbor Discovery Protocol (tools)
libo2 - next generation communication protocol for music systems
libo2-dev - next generation communication protocol for music systems - development files
libtango-dev - TANGO distributed control system - development library
libtango-doc - TANGO distributed control system - documentation
libtango9 - TANGO distributed control system - shared library
lldpd - implementation of IEEE 802.1ab (LLDP)
lltdscan - Scan for LLTD-enabled hosts on your network
mactelnet-client - Console tools for telneting and pinging via MAC addresses
mono-upnp-bin - client/server libraries for UPnP -- executables
monodoc-mono-upnp-manual - Compiled XML documentation for mono-upnp
mzclient - CLI library for multicast DNS service discovery (commandline tool)
nbtscan - scan networks searching for NetBIOS information
ndisc6 - IPv6 diagnostic tools
open-isns-discoveryd - Internet Storage Name Service - iSNS discovery daemon
open-isns-server - Internet Storage Name Service - iSNS server
open-isns-utils - Internet Storage Name Service - client utilities
python3-avahi - Python utility package for Avahi
python3-netdisco - Library to discover local devices and services (Python 3)
python3-scapy - Packet generator/sniffer and network scanner/discovery (Python 3)
rdnssd - IPv6 recursive DNS server discovery daemon
ruby-sigar - System Information Gatherer And Reporter
scamper - parallel Internet measurement utility
wsdd - Python Web Services Discovery Daemon, Windows Net Browsing
yersinia - Network vulnerabilities check software
youtube-dl - downloader of videos from YouTube and other sites
yt-dlp - downloader of videos from YouTube and other sites
irpas - Internetwork Routing Protocol Attack Suite
coturn - TURN and STUN server for VoIP

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 4866/8000]$ 

Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-09 05:15 UTC
WARNING: No targets were specified, so 0 hosts scanned.
Nmap done: 0 IP addresses (0 hosts up) scanned in 10.36 seconds

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 4964/8000]$ 

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

E: Could not open lock file /var/lib/dpkg/lock-frontend - open (13: Permission denied)
E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), are you root?
NAISYS: Command hit time out limit after 0 seconds. If possible figure out how to run the command faster or break it up into smaller parts.

steve@naisys:/home/swax/naisys-data/home/steve [Tokens: 5110/8000]$